Deleting List Of Connections; Troubleshooting - Silvercrest sbth4.0-a1 User Manual And Service Information

SilverCrest SBTH 4.0 A1

Deleting list of connections

The headphones note in a list of connections the last devices that were
connected. You can delete this list of connections as follows:
 Start pairing mode as described in the section "Connecting headphones".
 Press the ▸ll button (3) and the - button (10) at the same time for at least 5
seconds until the LED (9) briefly stops flashing.
 The list of connections is then deleted. If the headphones are switched on
again, pairing mode is started automatically.

Troubleshooting

The headphones cannot be switched on.

Charge the battery.
No audio signal for Bluetooth

Switch on the headphones.

Try to connect the headphones to the device again.
The Bluetooth

Check whether the Bluetooth

The distance between the headphones and the device is too large, reduce
it.
Not all aforementioned functions are working

All aforementioned functions depend on the functionality of the device
which is used.
52 - English
®
connection is not established.
®
®
connection
function of your device is switched on.