Bosch GSC 160 Professional Original Instructions Manual page 6

OBJ_BUCH-552-002.book Page 6 Tuesday, June 9, 2009 2:10 PM
6 | English
Functional Description
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The power tool is intended for cutting sheet
metals without loss due to metal chips. It is suit-
able for curved and straight cuts.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 On/Off switch
2 Chip deflector
3 Fastening screw for upper cutter
4 Upper cutter
5 Bottom cutter
6 Adjustment screw, bottom cutter
7 Fastening screw for bottom cutter
8 Allen key*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 609 929 M54 | (9.6.09)
Technical Data
Sheet Metal Shears
Article number
Rated power input
Output power
Stroke rate at no load n
0
Stroke speed under load min
Max. steel sheet cutting
capacity*
Smallest curve radius
Weight according to
EPTA-Procedure
01/2003
Protection class
2
* to 400 N/mm with reference to steel sheet
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Operation
Starting Operation
Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V
can also be operated with 220 V.
Switching On and Off
To start the machine, push the On/Off switch 1
forwards.
To lock the On/Off switch 1, additionally push
down the front of the switch.
To switch off the machine, release the On/Off
switch 1. When the On/Off switch is locked, press
on the rear of the switch and then release it.
GSC 160
Professional
0 601 500 4..
W 500
W 270
-1
min 5000
-1
3500
mm 1.6
mm 35
kg 1.8
/II
Bosch Power Tools