Electrolux ETV4500AX Instructions For Use Manual page 37

Options and functions of the TV menu
TV Automatic
shutdown
Standby search mode
(optional)
Storage Mode
(optional)
Power Up Mode
CEC
Turn on mode
Installation
Automatic channel
search
Manual channel
search
Network channel
search
Fine tune (analogue)
Initial Installation
When this function is enabled, it defines the time at which your television automatically
stops (between one and six hours).
If the Standby search mode is enabled, available channels will be searched when
the television is on standby. If the television finds missing or new channels, a menu
screen is displayed, asking if you wish to apply these changes or not. The channels
list is updated and edited after this process.
Enables or disables the Demo mode..
This setting confrigures the power up mode preference.
With this setting you can enable and disable CEC functionality completely. Press
Left or Right button to enable or disable the feature.
This parameter configures preferences of the power on mode.
Always enabled : the television comes on when the main power on/off button is pressed.
Standby: the television always comes on in standby mode. / Last view : the television
comes on on the last channel/source selected.
If you wish to install or update new channels, you can use this menu. It displays
automatic setting options. Digital antenna : Searches and stores DVB channels.
Digital cable :Searches and stores DVB cable television channels Analogue :
Searches and stores analogue stations. Analogue and digital antenna : Search
and store DVB and analogue channels. Analogue and digital cable : Search and
store analogue and DVB stations..
Used to search or directly store a channel if the frequency is known.
Searches channels related to the transmission system.
You can use this option to fine-tune analogue channels. It is only available if
analogue channels are stored.
Deletes all television settings and takes you back to the first installation.
English - 36 -