Siemens HiPath 3000 Operating Instruction page 164

Appendix
Error
The following, for
example, appears:
Base 1
Outgoing and
incoming calls and
activation/deactivation
are not possible.
The following appears:
incomplete
The following appears:
incomplete
The following appears:
Currently not
available
The following appears:
Not possible
or:
Incorrect entry.
or:
Key not
programmed.
The following appears:
no access
The following appears:
PIN incorrect
The following appears:
not available
The following appears:
protected
164
Possible cause
Handset is blocked.
Maximum input time
was exceeded.
The On-hook key was
not pressed.
The communication
system is overloaded.
Function is currently
not available.
No connection available
for the phone number
dialled.
Speed-dial number not
available, appointment
entered incorrectly,
entry blocked or not
allowed, prerequisite
not fulfilled (for
example if there is no
second partner for
toggling), number
dialled was incomplete.
Blocked function was
called.
Incorrect PIN was
entered.
Phone number was not
fully entered, the star or
hash key was not
pressed.
Data transfer is active. Wait and try again later.
Remedy
Remove the batteries
from the handset and
then re-insert them.
Proceed as when loading
batteries for first time
 page 19.
Avoid long pauses
between keystrokes.
Press the On-hook key.
Wait and try again later.
Wait and try again later.
Enter the phone number
correctly or call the
attendant console.
Correct your input,
select a permitted
option, enter the phone
number in full.
Apply to the relevant
service personnel for the
COS for the blocked
function.
Enter the correct PIN.
Enter the phone number
correctly or as
prescribed.