Huawei 9000 User Manual page 10

HUAWEI 9000 HD Video Terminal Touch Panel
User Guide
Parameter
Protocol
User name
Password
Step 4 Tap Save to save the parameter settings.
----End
Follow-up Procedure
Once connected successfully to the terminal, the touch panel displays the Huawei telepresence
home screen, as shown in
parameters. Drag Start to the wake button
be displayed.
Issue 01 (2012-04-30)
Description
Specifies the protocol used to connect the touch panel to the terminal. The
default value is HTTPS.
Hypertext Transfer Protocol Secure (HTTPS) helps to keep data transmissions
secure. Before selecting this protocol, enable SSL encryption on the terminal.
NOTE
To enable SSL encryption on the terminal, perform either of the following:
l From the web interface, choose System Settings > Security and Service >
Others and set SSL encryption to Enable.
l From the user interface controlled by the remote control, choose Settings >
Security > Web Login and select SSL encryption.
In these fields, enter the values of User name and User name password
predefined on the terminal's web interface. The default values are api.
NOTE
After connecting the touch panel to the terminal, change the touch panel's user name
and password as soon as possible to increase security. To change the touch panel's user
name and password, log in to the terminal's web interface and choose System
Settings > Personal > Settings of API User.
This method also applies when you forget the touch panel's user name or password.
Figure 2-2. For future connections, you do not need to set connection
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
,and the Huawei telepresence home screen will
2 Using the Touch Panel
4