STEP (7):
FF(4)
• Install (4) leveling feet (GG). Some adjustments may be
necessary after cabinet is in desired location.
i
/
\\\\\\\Xxx\
\
\
\
i,
J
!
i
/
/
,/
/
/
/
/
/
• Place the cabinet in its upright position.
• Square the cabinet and wrench tighten all bolts.
Square unit
\
\
\\
\\
\\
\
\\
\
\
',\
\
\
f
STEP (8):
CC(16)
Note: Install both doors and ensure proper alignment and
operation before tightening screws.
• Ensure lock on right side door (F) is in the unlock (raised)
position.
• Attach the right side door (F) as shown, using (8) screws (CC).
• For proper operation, the lock arm should enter slot on top of
shelf when rotated into the lock (down) position. The door latch
should line up with the notch on the front of the middle shelf.
• Adjust slider by loosening and retightening screws.
• Attach the left side door (E) in the same manner.
Adjust for
door latch
,J