Table of Contents
Advertisement
3.3.
Where necessary assemble wheels, handle & feet
according to the model supplied.(figs 1a,1b,)
3.3.
Where necessary assemble the work clamp supplied with your model to the cable associated with the work collet symbol as indicated below.
3.5.
Where necessary assemble the electrode holder supplied with your model to the cable associated with the manual arc welding symbol.
(see fig.3). On models with terminal style connections assemble eyelets to cables as shown in fig.3.
Fig 2
4. CONTROLS & SYMBOLS
The following is to assist you identify your model's control panel symbols.
THERMOSTATIC
PROTECTION
Lights up when the
machine overheats
and cuts out. The
machine can be used
again when cooled.
REGULATION
SCALE
GUIDE TO RATINGS
PLATE AND SYMBOLS
(For actual ratings of your model
refer to the front panel or top cover.)
Fig 1a
RAIN WARNING
SYMBOL
DO NOT use the
machine in the
rain or snow.
ELECTRO-FAN
Cools the
machine when
running.
Fig 3
ELECTRODE HOLDERS
SWITCH
Various. The electrode holder
POSITION
is connected to
settings
the machine
via this
outlet,
Arc Welders 150XL.V3,150XTC.V3,160XTC.V3,200XTC.V3 - 1 - 200707
Fig 1b
Manual arc welder
Work Collet
EARTH
CLAMP
FOR ANY FURTHER
CLARIFICATION OF
SYMBOLS REFER TO
BRITISH STANDARD
EN 60974-6
Advertisement
Table of Contents
