Panasonic BRS1D Service Manual page 20

4.2.5. Replacement of Loading P.C.B.
• Refer to "Replacement of Tray"
• Refer to "Replacement of Traverse Unit"
• Refer to "Replacement of Traverse Slide Plate"
• Refer to "Disassembly of Belt"
Step 1 : Desolder pins of the Wires (+) & (-) on the solder side
of Loading P.C.B..
Step 2 : Release Red and Black Wires from the slots.
Step 3 : Remove 1 screw.
Step 4 : Release the FFC from the slot.
Step 5 : Release the FFC from the hole of Mecha Chassis.
Step 6 : Release the catch and use a pin to lift up the Loading
P.C.B. as shown.
Step 7 : Remove Loading P.C.B..
20