Outputs - GE T35 Instruction Manual

2 PRODUCT DESCRIPTION
FORM-A RELAY
Make and carry for 0.2 s: 30 A as per ANSI C37.90
Carry continuous: 6 A
Break at L/R of 40 ms: 0.25 A DC max. at 48 V
0.10 A DC max. at 125 V
Operate time: < 4 ms
Contact material: Silver alloy
LATCHING RELAY
Make and carry for 0.2 s: 30 A as per ANSI C37.90
Carry continuous: 6 A
Break at L/R of 40 ms: 0.25 A DC max.
Operate time: < 4 ms
Contact material: Silver alloy
Control: separate operate and reset inputs
Control mode: operate-dominant or reset-dominant
FORM-A VOLTAGE MONITOR
Applicable voltage: approx. 15 to 250 V DC
Trickle current: approx. 1 to 2.5 mA
FORM-A CURRENT MONITOR
Threshold current: approx. 80 to 100 mA
FORM-C AND CRITICAL FAILURE RELAY
Make and carry for 0.2 s: 10 A
Carry continuous: 6 A
Break at L/R of 40 ms: 0.25 A DC max. at 48 V
0.10 A DC max. at 125 V
Operate time: < 8 ms
Contact material: Silver alloy
GE Multilin
FAST FORM-C RELAY
Make and carry:
Minimum load impedance:
INPUT
VOLTAGE
250 V DC
120 V DC
48 V DC
24 V DC
Note: values for 24 V and 48 V are the same due to a
required 95% voltage drop across the load impedance.
Operate time:
Internal Limiting Resistor: 100 Ω, 2 W
IRIG-B OUTPUT
Amplitude:
Maximum load:
Time delay:
Isolation:
CONTROL POWER EXTERNAL OUTPUT
(FOR DRY CONTACT INPUT)
Capacity:
Isolation:
REMOTE OUTPUTS (MMS GOOSE)
Standard output points: 32
User output points:
DIRECT OUTPUTS
Output points:
DCMA OUTPUTS
Range:
Max. load resistance:
Accuracy:
99% Settling time to a step change: 100 ms
Isolation:
Driving signal:
Upper and lower limit for the driving signal: –90 to 90 pu in steps of
T35 Transformer Management Relay
2.2 SPECIFICATIONS

2.2.7 OUTPUTS

0.1 A max. (resistive load)
IMPEDANCE
2 W RESISTOR 1 W RESISTOR
20 KΩ 50 KΩ
5 KΩ 2 KΩ
2 KΩ 2 KΩ
2 KΩ 2 KΩ
< 0.6 ms
10 V peak-peak RS485 level
100 ohms
1 ms for AM input
40 µs for DC-shift input
2 kV
100 mA DC at 48 V DC
±300 Vpk
32
32
–1 to 1 mA, 0 to 1 mA, 4 to 20 mA
12 kΩ for –1 to 1 mA range
12 kΩ for 0 to 1 mA range
600 Ω for 4 to 20 mA range
±0.75% of full-scale for 0 to 1 mA range
±0.5% of full-scale for –1 to 1 mA range
±0.75% of full-scale for 0 to 20 mA range
1.5 kV
any FlexAnalog quantity
0.001
2
2-9