Acer CE-6430 Service Manual page 17

Item
Press S1 to focus to vicinity (about 1.0m) and far (about 2.5m) in T
6 mode, confirm if can focus ok, that is the focus frame displays
green, that the focus frame displaying red is NG.
Select SETUP mode, select LCD BRIGHTNESS and press OK
button to enter into LCD brightness adjustment menu, press
7
left-right button to adjust LCD brightness to confirm if LCD
brightness is changing regularly. Check the F/W version.
In the above process, it shall be confirmed that the lens moving is
8
normal.
Part 2
1 Insert 3.0V AC Adapter, power on.
Press the OK button for four times; change the picture size to 640.
2 Confirm the TFT-LCD operation is normal and the buttons'
operation is normal.
Shift to the landscape mode, take a picture of flowers in Wide
mode, and shift to the night mode, tale a picture towards darkness
3
under the desk in red-eye reduction mode. The pre-flash and the
main flash shall be distinguished from each clearly.
Shift the mode dial for one circle, confirm if it shifts smoothly, and
4
each mode displayed in the left corner of LCD is normal.
Shift to record mode, LCD displays record image, press SHUTTER
5 to begin recording, use the sound box to catch the sound, stop
recording after over 3s.
Connect TV to press Playback button entering playback mode,
confirm the images. There cannot be any bad images and the
pictures cannot be color deviation. Select the Movie file, press OK
button to enter into playback mode, the sound cannot be any normal
6
or too low; press WIDE button, LCD displays nine-thumbnail
images, selecting the direction button can select the images. Pull off
the TV cable. There cannot be any abnormity of the above
operation.
Chapter 4
Operation Description Remark
12