1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
CAUTION
Be careful not to remove the FFC cable forcibly, because
the FFC cable may be damaged.
1-1: STAND ASS'Y (Refer to Fig. 1-1)
1. Remove the 2 screws (1).
2. Remove the Stand Ass'y in the direction of arrow.
Stand Ass'y
1-2: BACK CABINET ASS'Y (Refer to Fig. 1-2)
1. Remove the 12 screws(1)
2. Remove the Back Cabinet Ass'y in the direction of arrow.
(1)
(1)
(1) (1)
(1)
(1)
DISASSEMBLY INSTRUCTIONS
(1)
(1)
Fig. 1-1
(1)
(1)
(1)
(1)
(1)
(1)
(1)
Fig. 1-2
1-3: DVD MT PCB/LOADER UNIT (Refer to Fig. 1-3)
1. Disconnect the following connectors:
(CP2301, CP2302, CP2303, CP8501 and CP8502).
2. Remove the 2 screws (1).
3. Remove the Shield Deck in the direction of arrow (A).
4. Remove the 2 screws (2).
5. Remove the DVD MT PCB in the direction of arrow (B).
6. Remove the Loader Unit in the direction of arrow (C).
7. Remove the screw (3).
8. Remove the Holder Deck B in the direction of arrow (D).
(1)
(3)
Holder Deck B
(D)
1-4: MAIN PCB / SIDE JACK PCB (Refer to Fig. 1-4)
1. Remove the Plate Jack in the direction of arrow (A).
2. Remove the Shield Jack in the direction of arrow (B).
3. Disconnect the following connectors: (CD1201, CP2202,
CP3003, CD4202, CD4203 and CP6201).
4. Remove the 7 screws (1)
5. Remove the Main PCB and Side Jack PCB in the direction
of arrow (C).
Plate Jack
(1)
(1)
(A)
(1)
(B)
Shield Jack
Main PCB
(C)
B1-1
B1-1
(1)
(1)
Shield Deck
(2)
(2)
(A)
DVD MT PCB
(B)
Loader Unit
(C)
Fig. 1-3
(1)
(1)
(1)
Side Jack PCB
(1)
Fig. 1-3