8.2 BOOT CODE UPGRADE
8 BOOTCODE AND FIRMWARE UPGRADE
After accepting to proceed, a window will open up for selecting a temporary IP Address. It is advisable to set the IP Address
that is going to be used lately in the relay for Ethernet connection.
Figure 8–7: TEMPORARY IP ADDRESS SELECTION FOR BOOT UPGRADE
After entering the temporary IP address, a window will open up for selecting the appropriate file from the Multilin web site or
Product CD.
Figure 8–8: BOOT FILE SELECTION
Once the appropriate boot program file has been selected, the program will proceed to load the selected file.
8
Figure 8–9: LOADING BOOT FILE
8-6
G650 Generator Protection & Control System
GEK-113285A