Welcome Mode - Philips SE155 User Manual

1
Place the handset on the charging cradle
of the base station. A beep is emitted if
the handset is placed correctly.
2
The battery icon
blinks during charge.
3
The battery icon
when the handset is fully charged.
Note
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
The indoor and outdoor range of the phone
is up to 50 metres and 300 metres
respectively. When the handset moves
beyond the operation range, the antenna
icon will blink.
Tip
When reaching the range limit and the
conversation becomes crackly, move
closer to the base.
Country
Germany
Austria
Turkey
France
Switzerland
UK
Ireland
Italy
Portugal
Greece
Spain
Netherlands
Belgium
* By default, the outgoing message language 1 is displayed. See section 9.6.3 on how
to change the language of the predefined outgoing message
Getting started
on the display
becomes steady
Default outgoing message
language
German
German
Turkish
French
English
English
Italian
Portuguese
Greek
Spanish
English
3.4

Welcome mode

Before you first use your handset, you
need to configure it according to the
country of use. After charging it for a few
minutes, the word WELCOME appears in
various languages. Follow these steps to
configure your phone:
Note
Depending on your country, the
WELCOME screen may not appear. In this
case, you are not required to select your
country/operator/language settings.
You can still make outgoing calls or receive
incoming calls without first defining your
country selection. However, you cannot
use the answering machine function until
you have selected your country.
<
1
Press
OK
countries
*Outgoing message language
available
1 - German
2 - Turkish
3 - French
4 - English
1 - English
1 - Italian
2 - Portuguese
3 - Greek
4 - Spanish
1 - Dutch
2 - French
3 - German
4 - English
key to display a list of
13