Miele SEB 216 Operating Instructions Manual page 15

 Remove the roller brush (dia. 08).
 Unscrew screws a underneath the
Electrobrush and then separate the
lower section b from the top sec-
tion c (dia. 11).
 Replace the drive belt.
 Reassemble the Electrobrush in the
reverse order.
Replacing the mains cable
If the mains cable is damaged, it
must be replaced with a cable spe-
cifically made for this Electrobrush.
This cable can be purchased from
your Miele supplier or from Miele dir-
ectly.
en
15