A Risk of injury from sharp blades / rotating drive!
Never place fingers in the attached blender! Do not remove / attach
the blender until the drive is at a standstill! Operate the assembled
blender only and with the lid attached.
A Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0,5 litres of hot or frothing liquid.
A Important!
Use the appliance with original accessories only. When using the
accessories, follow the enclosed operating instructions. Use only one
tool or accessory at any one time.
A Explanation of the symbols on the appliance or accessory
Follow the instructions in the operating instructions.
Caution! Rotating blades.
Caution! Rotating tools.
Do not place fingers in the feed tube
Safety systems
Start lock-out
See "Operating positions" table.
The appliance can be switched on in position
1 and 3 only:
■ when the bowl (11) has been inserted
and turned until it locks into place and
■ the blender drive cover has been
attached (8).
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does
not start running again when the power is
restored. To switch the appliance on again,
turn the rotary switch to 0/off, then switch on.
Overload protection
If the motor switches itself off while the appli-
ance is being used, the overload protection
feature has been activated. A possible cause
may be that too much food was processed at
one time.
If a safety system is activated, see
"Troubleshooting".
Safety systems
en
5