Getting Started - D-Link DNR-326 Quick Install Manual

Ethernet Connection
Connect an Ethernet cable to the Ethernet port
of your DNR-326. This cable should connect your
DNR-326 to your local network via a router or switch,
or directly to a computer for configuration.
Connecting a UPS (Optional)
If you have a Universal Power Supply (UPS) that you
would like to use with the NVR, you may connect it
before powering the unit on.
1. Connect the USB cable from the UPS to the port on
the back of the NVR.
2. Connect the power cable to the UPS. (Ensure that
the UPS is plugged in and receiving power.)
Operation
Power On
Connect the power adapter. Switch the NVR on and
ensure the power LED on the front of the unit is lit.

Getting Started

1. Make sure the NVR is connected to a network
via a router or a switch, or directly connected
to a PC.
2. Insert the DNR-326 CD in the CD-ROM drive. If
the CD Autorun function does not automatically
start on your computer, go to Start > Run. In
the Run box, type D:\autorun.exe (where D:
represents the drive letter of your CD-ROM drive)
and click OK. When the autorun screen appears,
click NVR Search Utility.
3. Highlight an available NVR and click
Configuration to access the NVR's web UI. For
more detailed configuration instructions, please
refer to the user manual on the CD-ROM.
Figure 2. DNR-326 NVR Search Utility
D-Link 2-Bay Professional Network Video Recorder  3