Enable The Settings Template In Offline Mode; Enable The Settings Template In Online Mode; Edit The Settings Template - GE D90 Plus Instruction Manual
Line distance protection system
Hide thumbs
Also See for D90 Plus:
- Instruction manual (694 pages) ,
- Communications manual (222 pages) ,
- Instruction manual (602 pages)
Table of Contents
Advertisement
SETTINGS TEMPLATES
Enable the settings template in offline mode
Enable the settings template in online mode
Edit the settings template
82
The settings template mode allows the user to define which settings are visible in the
software. Settings templates can be applied to both settings files (settings file templates)
and online devices (online settings templates). The functionality is identical for both
purposes.
Settings file conversion from previous firmware versions is supported.
The settings file template feature is disabled by default. It can be enabled in offline or
online mode.
The following procedure outlines how to enable in offline mode the settings template for
Plus
UR
-series settings files.
1.
Select a settings file from the offline window of the EnerVista UR
screen.
2.
Right-click the selected settings file and select the Settings File Template > Create
Template option.
The settings file template is now enabled and the file menus displayed in light blue. A
message displays. The settings file is now in template editing mode.
Alternatively, the settings template can be applied to online settings, as follows.
1.
Select an installed device in the online window of the EnerVista UR
2.
Right-click the selected device and select the Template Mode > Create Template
option.
The software prompts for a template password. This password is required to use the
template feature and must be at least four characters in length.
Figure 61: Entering a settings file password
3.
Enter and re-enter the new password, then click OK to continue.
The online settings template is now enabled. The device is now in template editing mode.
The settings template editing feature allows the user to specify which settings are
available for viewing and modification in EnerVista UR
except the FlexLogic equation editor settings are locked.
1.
Select an installed device or a settings file from the menu on the left side of the
Plus
EnerVista UR
Setup window.
2.
Right-click and select the Template Mode > Edit Template option (online mode) or the
Settings File Template > Edit Template option (offline mode) to place the device in
template editing mode.
Plus
PLUS
D90
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: ENERVISTA SOFTWARE
Plus
Setup main
Plus
Setup window.
Setup. By default, all settings
Advertisement
Table of Contents
