Recording Schedule - Edit Sensor Events Settings - Canon VK-16 Setting Manual

Recording Schedule - Edit Sensor Events Settings

You can specify recording settings based on the occurrence of a sensor event. A number
of tabs in the Sensor Event Settings dialog are shown to reflect the number of sensors
on each camera. You can modify the recording settings for each sensor.
●
Step 1: Next to "On sensor event", click Settings...
Click a tab to change the
sensor's settings.
The sensor name
displayed is the name set
by the Camera Server.
Night Mode is available
for VB-C300, VB-
C50i/VB-C50iR, VB-
C50FSi and VB-C50Fi
Camera Servers or VC-
C50i/VC-C50iR cameras
connected to Camera
Server VB150s. Select
from Not specified, Day
Mode, or Night Mode.
You can set External
Outputs to On or Not
Specified when a sensor
event occurs.
● Frequent sensor events result in high CPU load on the Storage
Server. If you have 10 or more sensor events per minute
Note
continuously, we recommend continuous recording.
● Setting Night Mode to "Enabled" will activate the IR cut filter. It
will not turn on the built-in IR light. To turn on the IR light,
perform the operation from the Video Window menu.
Configure Motion and Sensor Settings
The Sensor Event Settings dialog opens.
Control the camera via
the Camera Control
Panel.
Refer to the Viewer
Manual for the
information about the
Camera Control Panel.
The Top page of the
Camera Server is
displayed after Internet
Explorer launches.
Set whether or not to
use additional options
(exposure, white
balance, and focus).
6
91