Specifications - Makita BVR340 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Vibrations per minute (min
Vibration amplitude
Vibration head (diameter x length)
Flexible shaft assembly length
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Do not use the tool in the rain.
･
Do not clean the tool with water.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for removing bubbles from concrete
when casting concrete.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BVR350
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
BVR340
-1
) 12,500
800 mm
1,083 mm
3.1 kg
END003-2
ENE055-1
ENG905-1
) : 74 dB(A)
pA
BVR440 BVR350
12,500
25 mm x 221 mm
1,200 mm
1,483 mm 1,083 mm
3.6 kg
D.C. 14.4 V
Model BVR450, BVR850
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BVR350
Work mode : operation without load
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BVR450, BVR850
Work mode : operation without load
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
2
BVR450
13,000 13,000
1.0 mm
800 mm 1,200 mm
1,483 mm
3.0 kg 3.5 kg
D.C. 18V
) : 70 dB(A) or less
pA
2
) : 3.0 m/s
h
2
2
) : 2.5 m/s or less
h
2
BVR850
12,500
2,400 mm
2,683 mm
5.2 kg
ENG900-1
ENG901-1