Toshiba e-studio 2000ac Safety Information Manual page 7

For the U.S.A. only
FCC NOTICE
e-STUDIO2505AC/3005AC/3505AC/4505AC/5005AC
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 and Part 18 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
e-STUDIO2000AC/2500AC, e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
WARNING
Changes or modification made to this equipment, not expressly approved by TOSHIBA TEC or parties
authorized by TOSHIBA TEC, could void the user's authority to operate the equipment.
e-STUDIO2505AC/3005AC/3505AC/4505AC/5005AC, e-STUDIO2008A/2508A/3008A/3508A/
4508A/5008A
User Safety
This TOSHIBA Multifunctional Digital Systems does not produce laser radiation hazardous to the
user. It is certified as a Class 1 laser product under the U.S Department of Health and Human Services
(DHHS) Radiation Performance Standard according to the Radiation Control Health and Safety Act of
1968 including amendments.
Protective housing and external covers completely confine the laser beam light emitted inside the
Multifunctional Digital Systems. The laser beam cannot escape from the machine during any phase
of user operation.
Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of the U.S
Food and Drug Administration apply to laser products manufactured from August 1,1976. Laser
products marketed in the United States must comply with these regulations.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Safety Information 7