Advertisement
Mount in the dashboard
Note
Check wire connection before you mount
the unit into a car.
If preset radio stations are lost when the
ignition key is turned OFF and then back
ON, reconnect the red leads crosswise to
the yellow ones.
1
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
2
Ensure that car dashboard opening is within
these measurements:
3
Slide the unit into the dashboard until a
click sound is heard.
4
Attach the trim plate.
5
Reconnect the negative terminal of the car
battery.
Turn on
Caution
Risk of road accidents! Never watch video or
adjust settings while you drive.
1
Press
to turn on the unit.
»
The available OSD (On-Screen Display)
languages are displayed.
2
Touch a language to select.
»
The OSD language is changed to the
selected language immediately.
2
a
b
c
To adjust screen brightness/contrast, press
/
on the remote control, then press
, ,
or .
To turn off the unit, press
Set date and time
1
Touch the upper left corner to display main
menu.
2
Touch in the middle right side of the
screen.
»
The second main menu is displayed.
3
Touch [Settings].
4
Touch [Time].
»
The date/time setup menu is displayed.
Set date
1
Touch [Date].
2
Touch on the displayed date information.
»
A submenu is displayed.
for 3 seconds
Advertisement
