Cisco D9824 Installation And Configuration Manual page 251

Alarm Message
Type
Digital Set
Program
Mapping
Digital Clear
Program
Mapping
Shutdown Set
Event
Shutdown Set
Event
78-4039426-01 Rev D
Message Cause/Remedy
Mode-i PMT out Cause: Uplink
of range settings may have
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink
to find the
appropriate
system settings.
Digital Program
Mapping - OK
DL APP REBOOT Cause: User
request requires
reboot or internal
system error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify
customer service if
the problem
persists.
User requested Cause: User
FPGA change request requires
reboot or internal
system error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify
customer service if
the problem
persists.
D9824 Alarm Messages
Description Severity
PMT PID to be Major
used for Mode-
i is outside of
valid MPEG
PID range.
Major
New Major
application
downloaded,
system requires
reboot.
Runnable Major
FPGA change
requires reboot.
229