Canon EOS C700 Instruction Manual page 219

• HDMI OUT Terminal
HDMI connector, output only
LUT (BT.709, BT.2020, DCI, HDR (SMPTE ST 2084), ACESproxy) and supplemental displays (superimposed
onscreen displays, peaking, zebra pattern, magnification, B&W image, waveform monitor, false color display,
anamorphic desqueeze) can also be output.
• VIDEO Terminal
Proprietary connector for the optional EVF-V70 OLED Electronic Viewfinder, output only
LUT (BT.709, SMPTE ST 2084 Assistance (400% or 1600%)) and supplemental displays (superimposed
onscreen displays, peaking, zebra pattern, magnification, B&W image, waveform monitor, false color display,
anamorphic desqueeze) can also be output.
• INPUT Terminals (INPUT 1 and INPUT 2)
XLR 3-pin jack (pin1: shield, pin2: hot, pin3: cold), 2 sets, balanced
Analog Inputs
Sensitivity:
MIC setting: –60 dBu (volume center, full scale –18 dB) / 600 Ω
LINE setting: 4 dBu (volume center, full scale –18 dB) / 10 kΩ
Microphone attenuator: 20 dB
Digital Inputs (AES/EBU)
AES3 standard (48 kHz, 24 bit, 2ch) / 110 Ω
• MIC Terminal
∅ 3.5 mm stereo mini-jack, –72 dBV (volume center, full scale –18 dB) / 1.2 kΩ
Microphone attenuator: 20 dB
• × (Headphone) Terminal
∅ 3.5 mm stereo mini-jack, –G to –8 dBV (16 Ω load, volume range Min to Max) / 50 Ω or less
• GENLOCK/SYNC OUT Terminal
BNC jack, 1.0 Vp-p / 75 Ω
GENLOCK setting: input only; SYNC OUT setting: output only, tri-level HD signal
• TIME CODE IN/OUT Terminal
BNC jack, input/output
Input setting: 0.5 Vp-p to 18 Vp-p / 100 kΩ; Output setting: 1.3 Vp-p / 50 Ω or less
• REMOTE A Terminal, REMOTE B Terminal
REMOTE A: ∅ 2.5 mm stereo sub-mini jack
REMOTE B: Circular 8-pin jack (for the optional RC-V100 Remote Controller, RS-422 interface)
• CTRL Terminal
LEMO circular 7-pin jack (for the optional OU-700 Remote Operation Unit)
• (Ethernet) Terminal
Ethernet, 1000BASE-T compatible
• LENS Terminal
Circular 12-pin jack (12-pin serial interface)
• System Extension Terminal
Proprietary connector for optional accessories
Power/Others
• Compatible Batteries
V-mount batteries, rated input: 14.8 V DC (acceptable range: 12 V to 20 V DC)
• DC IN 12V Terminal
XLR 4-pin jack (male connector), rated input: 12 V DC
(acceptable range: 11.5 V to 20 V DC), 10 A (acceptable maximum
load current)
Specifications
GND (ground)
12 V to 20 V DC
N/A
N/A
219