1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. DIR-605
  6. User manual

D-Link DIR-605 User Manual

Broadband aggregation router
Hide thumbs Also See for DIR-605:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Manual

User Manual

DIR-605
D-Link® Fuzion™
Broadband Aggregation Router
with Fuzion™ Cloud Service
B u s i n e s s C l a s s N e t w o r k i n g

Advertisement

Table of Contents
loading

Related Manuals for D-Link DIR-605

Summary of Contents for D-Link DIR-605

  • Page 1: User Manual

    User Manual DIR-605 D-Link® Fuzion™ Broadband Aggregation Router with Fuzion™ Cloud Service B u s i n e s s C l a s s N e t w o r k i n g...

  • Page 2: Preface

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description September 21, 2011 • Updated for revision D1 (Fuzion)

  • Page 3: Table Of Contents

    Dynamic IP Address (DHCP) ........18 Wireless Connection Setup Wizard ........44 PPPoE (DSL) ..............19 Add Wireless Device with WPS Wizard ........47 PPTP ..................20 Configure WPA-Personal (PSK) ..........48 L2TP ..................21 Configure WPA-Enterprise (RADIUS) ........49 Static IP Address .............23 D-Link DIR-605 User Manual...
  • Page 4 Configure WPA/WPA2 ............54 Connect Using WCN 2.0 ...........56 Using Windows® XP ..............57 Configure WPA-PSK ............58 Troubleshooting...............60 Wireless.Basics..............64 What is Wireless? .................65 Tips ....................67 Wireless Modes ................68 Networking.Basics............69 Check your IP address ...............69 Statically Assign an IP address ..........70 D-Link DIR-605 User Manual...

  • Page 5: Product.overview

    Product Overview Package Contents DIR-605.Fuzion™.Broadband. Aggregation.Router Power.Adapter Ethernet.Cable Quick.Install.Guide Note: Using a power supply with a different voltage rating than the one included with the DIR-605 will cause damage and void the warranty for this product. D-Link DIR-605 User Manual...

  • Page 6: System Requirements

    • Internet Explorer 8.0 or higher Utility.Requirements • Chrome 5.0 or higher • Firefox 3.6 or higher • Safari 4.0 or higher Windows®.Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. D-Link DIR-605 User Manual...

  • Page 7: Features

    • Fuzion allows Customers to define the Alerts they receive when certain events happen (for example when a router goes down). Customers may choose to receive an email or generate a HTTP post to be pro-actively notified of an event. D-Link DIR-605 User Manual...
  • Page 8 * Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-605 User Manual...

  • Page 9: Hardware Overview

    Connect to your clients via Ethernet cable. See Receptor for the supplied power adapter. Connecting your Network. 2.-.Internet.Port 4.-.Reset Connects to your broadband modem via Pressing the Reset button restores the router Ethernet cable. to its original factory default settings. D-Link DIR-605 User Manual...

  • Page 10: Leds

    4.-.Local.Network.LEDs. A solid light indicates connection on the Internet A solid light indicates a connection to an Ethernet enabled port. This LED blinks during data transmission. computer on ports 1-4. This LED blinks during data transmission. D-Link DIR-605 User Manual...

  • Page 11: Installation

    • If your modem(s) are connected to other routers, gateways, or computers, you must turn off the modem(s) for at least 2 minutes to clear out the MAC address so the D-Link router can connect to the Internet. D-Link DIR-605 User Manual...

  • Page 12: Wireless Installation Considerations

    1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

  • Page 13: Network Diagram

    Section 2 - Installation Network Diagram Laptop Wireless Router Wireless Router DIR-605 DIR-605 INTERNET RESET - - - INTERNET RESET - - - Switch D-Link DIR-605 User Manual...

  • Page 14: Connect To Cable/Dsl/Satellite Modem

    8. Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct. 9. To configure your router, refer to the next page. D-Link DIR-605 User Manual...

  • Page 15: Configuration

    Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.3.17).

  • Page 16: Internet Connection Setup Wizard

    Once logged into the web interface of the router, the Setup.>.Internet page will appear. Click the Internet.Connection.Setup. Wizard button to quickly configure your router using the setup wizard. If you want to enter your settings without running the wizard, click Manual.Internet.Configuration.Wizard and skip to page 16. D-Link DIR-605 User Manual...
  • Page 17 Section 3 - Configuration Click Next to continue. Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. D-Link DIR-605 User Manual...
  • Page 18 If you are currently using that computer, click Clone.Your.PC’s.MAC.Address and then click Next to continue. The Host Name is optional but may be required by some ISPs. The default host name is DLink-DIR-605D1. D-Link DIR-605 User Manual...
  • Page 19 Note:.Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If you selected PPTP, enter your PPTP username and password. Click Next to continue. D-Link DIR-605 User Manual...
  • Page 20 If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue. Click Connect to save your settings. Once the router is finished rebooting, click Continue. Please allow 1-2 minutes to connect. D-Link DIR-605 User Manual...

  • Page 21: Manual Configuration

    If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select your Internet type and enter the correct configuration parameters. Select your Internet connection type using the “My. Internet.Connection.is” drop-down menu. Click the Save. Settings button when you have configured the connection. D-Link DIR-605 User Manual...

  • Page 22: Dynamic Ip Address (Dhcp)

    Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone.Your. PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-605 User Manual...

  • Page 23: Pppoe (Dsl)

    The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-605 User Manual...

  • Page 24: Pptp

    The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-605 User Manual...

  • Page 25: L2Tp

    Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only). D-Link DIR-605 User Manual...
  • Page 26 The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended Address: that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-605 User Manual...

  • Page 27: Static Ip Address

    Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-605 User Manual...

  • Page 28: Wireless Settings

    Multiple.Routers.or Single.Router. 2. Next, go to Setup>Wireless. Settings>Manual.Wireless and check Enable. Note:.You.must.enable.both.selections.in.order.to.turn.the.WLAN. On..Enabling.only.one.will.not.work.and.the.WLAN.will.remain.off.. If you want to manually configure the wireless settings on your router click Manual Wireless.Network.Setup.and refer to the next page. D-Link DIR-605 User Manual...

  • Page 29: Manual Wireless Network Setup

    Enable Auto The Auto.Channel.Scan setting can be selected to allow Channel Scan: the DIR-605 to choose the channel with the least amount of interference. Indicates the channel setting for the DIR-605. By default Wireless Channel: the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network.
  • Page 30 In order for your wireless devices to connect to your router, you will need to manually enter the Wireless Network Name on each device. Wireless Security: Refer to Section.4.-.Wireless.Security for more information regarding wireless security. D-Link DIR-605 User Manual...

  • Page 31: Network Settings

    Enter the Device name (set to dlinkrouter by default). Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-605 User Manual...

  • Page 32: Dhcp Server Settings

    NetBIOS name to log in router web interface. (The default is “dlinkrouter”) NetBIOS Scope The users may add some characters behind the NetBIOS name to differentiate it from other D-Link routers. It follows the naming (optional): rule for DNS names.

  • Page 33: Fuzion Settings

    Fuzion heartbeats) when no other Internet connection is available. Failover mode is useful if you wish to use a 3g router or a connection with a low monthly data cap as a backup to your Fuzion bonded solution. D-Link DIR-605 User Manual...

  • Page 34: Advanced Wireless Settings

    WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create higher data loss. D-Link DIR-605 User Manual...

  • Page 35: Wi-Fi Protected Setup

    “Add wireless device with WPA wizard” for more information. Note: WPS is disabled by default. To use WPS, you must enable the wireless function. Click on Setup > Wireless.Settings > Manual.Wireless.Network.Setup and check the Enable Wireless box. D-Link DIR-605 User Manual...

  • Page 36: Advanced Network Settings

    Section 3 - Configuration Advanced Network Settings WAN Ping Unchecking the box will not allow the DIR-605 to respond Response: to pings. Blocking the Ping may provide some extra security from hackers. Check the box to allow the Internet port to be “pinged”.

  • Page 37: Administrator Settings

    The port number used to access the DIR-605. Port: Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-605 and 8080 is the port used for the Web Management interface. Inbound Filter: This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or go to Advanced >...

  • Page 38: Time Settings

    Internet, not a local server. NTP Server Used: Enter the NTP server or select one from the drop-down menu, then the DIR-605 will sync the same time to D-Link Internet time server. Manual: To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set.Time.

  • Page 39: System Settings

    Save button above. Reboot Device: Click to reboot the router. Clear Language This is to restore the device back to English version only. Pack: Remove other languages installed for the system web pages. D-Link DIR-605 User Manual...

  • Page 40: Update Firmware

    You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com.

  • Page 41: System Check

    The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. Ping Results: The results of your ping attempts will be displayed here. D-Link DIR-605 User Manual...

  • Page 42: Device Information

    Section 3 - Configuration Device Information This page displays the current information for the DIR-605. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address, then a Release button and a Renew button will be displayed.

  • Page 43: Stats

    Section 3 - Configuration Stats The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-605 on both the Internet and the LAN ports. The traffic counter will reset if the device is rebooted.

  • Page 44: Wireless

    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. D-Link DIR-605 User Manual...

  • Page 45: Fuzion

    Displays the wireless MAC address and your wireless settings such as SSID and Channel. LAN Computers: Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). D-Link DIR-605 User Manual...

  • Page 46: Support

    Section 3 - Configuration Support D-Link DIR-605 User Manual...

  • Page 47: Wireless.security

    Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-605 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK(Pre-Shared Key) •...

  • Page 48: Wireless Connection Setup Wizard

    Section 4 - Security Wireless Connection Setup Wizard To run the security wizard, browse to the Setup page and then click the Wireless.Connection.Setup.Wizard.button. Click Next to continue. D-Link DIR-605 User Manual...
  • Page 49 Or if you would like to create the key by your own, please click the “Manual assign a Network key” button and click Next to continue. Enter your security password (network key) in the box and click Next to continue. D-Link DIR-605 User Manual...
  • Page 50 Section 4 - Security Click Save to finish the Security Wizard. If you selected WPA-Enterprise, the RADIUS information will be displayed. Click Save to finish the Security Wizard. D-Link DIR-605 User Manual...

  • Page 51: Add Wireless Device With Wps Wizard

    PIN: Select this option to use PIN method. In order to use this method you must know the wireless client’s 8 digit PIN and click Connect. PBC:.Select this option to use PBC (Push Button) method to add a wireless client. Click Connect. D-Link DIR-605 User Manual...

  • Page 52: Configure Wpa-Personal (Psk)

    6. Click Save.Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router. D-Link DIR-605 User Manual...

  • Page 53: Configure Wpa-Enterprise (Radius)

    5. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server. 6. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 7. Next to RADIUS Server Shared Secret, enter the security key. D-Link DIR-605 User Manual...

  • Page 54: Connect.to.a.wireless.network

    If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. D-Link DIR-605 User Manual...
  • Page 55 If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-605 User Manual...
  • Page 56 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-605 User Manual...

  • Page 57: Windows Vista

    Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking. Basics section in this manual for more information. D-Link DIR-605 User Manual...

  • Page 58: Configure Wpa/Wpa2

    1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect.to.a.network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-605 User Manual...
  • Page 59 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-605 User Manual...

  • Page 60: Connect Using Wcn 2.0

    Current PIN that is displayed on the Advanced > Wi-Fi.Protected.Setup section or choose to click the Generate.New.PIN button or Reset.PIN.to.Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-605 User Manual...

  • Page 61: Using Windows® Xp

    Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking. Basics section in this manual for more information. D-Link DIR-605 User Manual...

  • Page 62: Configure Wpa-Psk

    1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View.Available.Wireless. Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-605 User Manual...
  • Page 63 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-605 User Manual...

  • Page 64: Troubleshooting

    1..Why.can’t.I.access.the.web-based.configuration.utility? When entering the IP address of the D-Link router (192.168.3.17 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
  • Page 65 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management.
  • Page 66 NT, 2000, and XP users type in cmd) and press • Windows ® ® Enter.(or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: . ping.[url].[-f].[-l].[MTU.value] Example: ping.yahoo.com.-f.-l.1472 D-Link DIR-605 User Manual...
  • Page 67 • To change the MTU enter the number in the MTU field and click Save.Settings to save your settings. • Test your e-mail. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-605 User Manual...

  • Page 68: Wireless.basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.

  • Page 69: What Is Wireless

    Why.D-Link.Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How.does.wireless.work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B.
  • Page 70 Who.uses.wireless?. Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •...

  • Page 71: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.

  • Page 72: Wireless Modes

    • Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more DIR-605 wireless network Cardbus adapters. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.

  • Page 73: Networking.basics

    This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-605 User Manual...

  • Page 74: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.3.17). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step.5 Click OK twice to save your settings. D-Link DIR-605 User Manual...

  • Page 75: Technical.specifications

    * Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DIR-605 User Manual...

  • Page 76: Contacting Technical Support

    • Hardware Revision (located on the label on the bottom of the Network Camera (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the Network Camera). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.

  • Page 77: Warranty

    Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
  • Page 78 Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.
  • Page 79 D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.
  • Page 80 FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.
  • Page 81 The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office.
  • Page 82 This device has been designed to operate with an antenna having a maximum gain of 2dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. Version 4.0 September 21, 2011 D-Link DIR-605 User Manual...

Table of Contents