Checking The Remaining Time Or The Recording Position - Sony MZ-R30 Operating Instructions Manual

MZ-R30 Operating Instructions
5. Press again to start recording.
To stop recording, press
The recording level control is switched back to automatic control.
When you record with microphone input, select the input level with

Checking the remaining time or the recording position

1. Press DISPLAY while recording or in stop mode. Each time you press the button, the display changes as
follows.
While recording
A
Elapsed time
Remaining time for recording Track number
Current time
1)
Appears only when the clock is set.
1)
http://www.birst.co.uk/engineering/mzr30/mz-r30e.htm (11 of 32) [16/12/2002 22:59:45]
.
B
Track number
Current date
1)
While observing the level meter in the display, adjust the
recording level by pressing
Set the level so that it hits the second indicator from the
top when the recorder receives the maximum sound.
Note
The recording level should be adjusted while the recorder
is in standby mode. You cannot adjust it while recording.
MIC SENS
In stop mode
A
Elapsed time
Remaining time for recording
Remaining time after the current location Disc name
Current time
3)
The number of the track appears when the track has no
1)
name.
Remaining number of tracks appears when the MD has no
2)
disc name.
Appears only when the clock is set.
3)
(+) or (-).
.
B
Track number
Track name
Current date
1)
1)
3)