Epson Pro Cinema LS10500 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. PRO CINEMA LS10500
  6. User manual
Epson Pro Cinema LS10500 User Manual

Epson Pro Cinema LS10500 User Manual

Hide thumbs Also See for Pro Cinema LS10500:
Table of Contents

Advertisement

Quick Links

Download this manual
Pro Cinema LS10500 User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson Pro Cinema LS10500

Summary of Contents for Epson Pro Cinema LS10500

  • Page 1 Pro Cinema LS10500 User's Guide...

  • Page 3: Table Of Contents

    Contents Pro Cinema LS10500 User's Guide ......................9 Introduction to Your Projector ......................... 10 Projector Features..........................10 Product Box Contents........................11 Additional Components ........................ 12 Optional Equipment and Replacement Parts................. 13 Warranty and Registration Information ..................14 Notations Used in the Documentation ....................14 Where to Go for Additional Information ....................
  • Page 4 Connecting to External Speakers ....................33 Connecting to a Trigger Out Port ....................33 Securing Cables with the Cable Clamp ....................34 Installing Batteries in the Remote Control ..................35 Using the Projector on a Network ......................38 Wired Network Monitoring and Control....................38 Connecting to a Wired Network .....................
  • Page 5 Changing the Image Aspect Ratio ....................72 Available Image Aspect Ratios ...................... 72 Color Mode............................73 Changing the Color Mode......................74 Available Color Modes........................74 Adjusting the Lens Iris ........................75 Changing the Super-resolution/4K Enhancement Setting ..............76 Using Picture in Picture ........................77 Available Picture in Picture Options....................
  • Page 6 Solving Problems ............................ 117 Projection Problem Tips ........................117 Projector Light Status ........................117 Solving Image Problems ........................121 Solutions When No Image Appears..................... 121 Solutions When "No Signal" Message Appears................122 Displaying From a PC Laptop ....................122 Displaying From a Mac Laptop ....................123 Solutions When "Not Supported"...
  • Page 7 Notices ..............................139 Recycling............................139 Important Safety Information ......................139 Laser Safety Information ........................140 Laser Optical Path ........................142 Important Safety Instructions......................142 3D Safety Instructions ......................... 145 Restriction of Use ........................147 FCC Compliance Statement......................147 Open Source Software License......................148 Binding Arbitration and Class Waiver ....................

  • Page 9: Pro Cinema Ls10500 User's Guide

    Pro Cinema LS10500 User's Guide Welcome to the Pro Cinema LS10500 User's Guide. For a printable PDF copy of this guide, click here.

  • Page 10: Introduction To Your Projector

    Where to Go for Additional Information Projector Part Locations Projector Features The Pro Cinema LS10500 projector include these special features: Bright, high-resolution projection system • Up to 1500 lumens of color brightness (color light output) and 1500 lumens of white brightness (white...

  • Page 11: Product Box Contents

    Easy-to-use setup and operation features • Laser light source provides up to 30,000 hours of operation • Powered lens memory function for maintaining constant height for up to five different aspect ratios • Vertical and horizontal lens shift, and vertical keystone correction buttons for flexible projector placement •...

  • Page 12: Additional Components

    This allows you to mirror your smartphone or tablet screens, watch movies, and more. Contact your device manufacturer for compatible adapter options. Unless listed as available from Epson in this table, see your local computer or electronics dealer for purchase information.

  • Page 13: Optional Equipment And Replacement Parts

    Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada. Or you can purchase online at epsonstore.com...

  • Page 14: Warranty And Registration Information

    In addition, Epson offers free Extra Care Home Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Home Service brochure for details.

  • Page 15: Projector Part Locations

    Projector Part Locations Check the projector part illustrations to learn about the parts on your projector. Projector Parts - Front/Top Projector Parts - Rear Projector Parts - Interface Ports Projector Parts - Base Projector Parts - Control Panel and Projector Lights Projector Parts - Remote Control Parent topic: Introduction to Your Projector...

  • Page 16: Projector Parts - Rear

    Parent topic: Projector Part Locations Projector Parts - Rear Remote receiver Projector ports Cable clamp Cable cover screw holes Air intake/air filter cover Parent topic: Projector Part Locations...

  • Page 17: Projector Parts - Interface Ports

    Projector Parts - Interface Ports HDMI1 and HDMI2 ports HDMI cable clip slots LAN port Service port RS-232C port PC port (VGA) Component ports Trigger out 1 and Trigger out 2 ports Video port Parent topic: Projector Part Locations...

  • Page 18: Projector Parts - Base

    Projector Parts - Base Screw holes for anamorphic lens Adjustable front feet Mounting bracket holes Power inlet Parent topic: Projector Part Locations...

  • Page 19: Projector Parts - Control Panel And Projector Lights

    Projector Parts - Control Panel and Projector Lights Temp light Laser light Status light Power light Power button Source button (cycles through the list of sources) Lens button (cycles through the lens adjustment options) Menu button (accesses configuration menus) Directional thumbstick and OK button (push in for OK button; thumbstick controls menu selection and keystone adjustment) Esc button (cancels/exits function)

  • Page 20: Projector Parts - Remote Control

    Parent topic: Projector Part Locations Related references Projector Light Status Projector Parts - Remote Control Top buttons On button (turns on projector) Standby button (stops projection and closes the lens shutter) Illumination button (lights the remote control) Blank button (turns off video projection) P-in-P button (controls the Picture-in-Picture mode for HDMI inputs) Source buttons (select specific video input sources) HDMI Link control buttons (control playback and other features of connected devices that support...
  • Page 21 Center buttons Lens button (cycles through the lens adjustment options) Color Mode button (selects display modes) 2D/3D button (cycles between 2D and 3D modes) Arrow buttons (move though on-screen options) Enter button (selects options) Default button (returns selected setting to default value) Menu button (accesses projector menu system) Esc button (cancels/exits functions)
  • Page 22 Bottom buttons Memory button (accesses the Memory menu) Lens 1 and Lens 2 buttons (load a saved lens position) 3D Format button (changes the 3D format) Frame Int button (adjusts the Frame Interpolation setting) SupRes/4K button (reduces blurring around the edges of images when viewing 3D content, or adjusts the 4K Enhancement setting for ultra-high-definition images) Dyn Cr button (adjusts the Dynamic Contrast setting) Aspect button (selects the image aspect ratio)

  • Page 23: Setting Up The Projector

    Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Removing and Attaching the Cable Cover Projector Connections Securing Cables with the Cable Clamp Installing Batteries in the Remote Control Projector Placement You can place the projector on almost any flat surface to project an image.
  • Page 24 Front Rear Front Ceiling...

  • Page 25: Projection Distance

    Use the tables here to determine approximately how far to place the projector from the screen based on the size of the projected image. (Conversion figures may have been rounded up or down.) You can also use the projector Throw Distance Calculator at epson.com/support (U.S.) or epson.ca/support...
  • Page 26 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center Offset from lens center Wide to Tele 40 inches (101.6 cm) 53.9 to 115.7 inches 9.4 inches (24 cm) 33.5 inches (85 cm) (137 to 294 cm) 60 inches (152.4 cm) 81.5 to 174.8 inches...

  • Page 27: Removing And Attaching The Cable Cover

    Screen or image size Projection distance (1) Offset from lens center Offset from lens center Wide to Tele 100 inches (254 cm) 111.4 to 237.8 inches 19.7 inches (50 cm) 68.5 inches (174 cm) (283 to 604 cm) 120 inches (304.8 cm) 134.3 to 285.4 inches 23.6 inches (60 cm) 82.3 inches (209 cm)

  • Page 28: Projector Connections

    2. Lift off the cable cover. To attach the cable cover, slide it into position and tighten the screws with a screwdriver. Parent topic: Setting Up the Projector Projector Connections See these sections to connect the projector to a variety of projection sources. Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly.

  • Page 29: Connecting To An Hdmi Video Source

    Connecting to a Component Video Source Connecting to a Composite Video Source Parent topic: Projector Connections Connecting to an HDMI Video Source If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality.

  • Page 30: Connecting To A Component Video Source

    1. Plug in the HDMI cable. 2. Insert the end of the cable clip anchor into the cable clip slot near the HDMI port. 3. Place the open cable clip around the HDMI cable, but don't lock it into place. 4.

  • Page 31: Connecting To A Composite Video Source

    Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source. To reduce the potential lag in response time to game commands, set your game console's output format to a progressive signal of 480p, 720p, or higher. See your game console documentation for instructions.

  • Page 32: Connecting To A Computer For Hdmi Video

    Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port. Contact Apple for compatible adapter options. 1.

  • Page 33: Connecting To External Speakers

    Related tasks Attaching and Removing the HDMI Cable Clips Connecting to External Speakers To add sound, you can connect your video source and speakers to an audio video receiver, then connect the receiver to the projector using one of the receiver's compatible video outputs (an HDMI connection provides the best image quality, if available).

  • Page 34: Securing Cables With The Cable Clamp

    2. Connect the other end to one of the projector's Trigger Out ports. 3. Turn on the Trigger Out setting in the projector's Settings menu. Parent topic: Projector Connections Securing Cables with the Cable Clamp You can use the cable clamp on the back of the projector to secure any connected cables. 1.

  • Page 35: Installing Batteries In The Remote Control

    2. Gather any connected cables together and move them into the cable clamp. Note: Do not include the power cord in the cable clamp. 3. Close the cable clamp and press the tab until it clicks into place. Parent topic: Setting Up the Projector Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector.
  • Page 36 1. Remove the battery cover. 2. Insert the batteries with the + and – ends facing as shown.
  • Page 37 3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.

  • Page 38: Using The Projector On A Network

    Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wired Network Monitoring and Control Setting Up Projector Network E-Mail Alerts Setting Up Network Monitoring Controlling a Networked Projector Using a Web Browser Wired Network Monitoring and Control You can monitor, configure, and control your projector through a wired network.

  • Page 39: Selecting Wired Network Settings

    Selecting Wired Network Settings Before you can project from computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you already connected the projector to your wired network using the LAN port. 1.
  • Page 40 5. Select the Basic menu and press Enter. 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector control.
  • Page 41 7. Select the Wired LAN menu and press Enter. 8. Select IP Settings and press Enter. 9. Select your IP Settings as necessary: • If your network assigns addresses automatically, turn on the DHCP setting.

  • Page 42: Restricted Ip Addresses

    • If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address as needed. When manually entering IP Settings, you cannot use restricted IP addresses. Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control.
  • Page 43 2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 4. Select the Mail menu and press Enter. 5. Turn on Mail Notification. 6. Enter the IP address for the SMTP Server option. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255).

  • Page 44: Network Projector E-Mail Alert Messages

    When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you receive an e-mail containing the following information: • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector •...

  • Page 45: Controlling A Networked Projector Using A Web Browser

    4. Select the Others menu and press Enter. 5. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to allow the projector to be detected. 6. If your network environment uses a Control4 or Control4 SDDP controller, turn on the Control4 SDDP setting to allow the projector to be detected.
  • Page 46 1. Make sure the projector is turned on. 2. Start your web browser on a computer or device connected to the network. 3. Type the projector's IP address into the browser's address box and press the computer's Enter key. Note: You may need to log in before you see the Web Control screen. If you see a log in window, enter your user name and password.
  • Page 47 4. To select projector menu settings, select the name of the menu and follow the on-screen instructions. 5. To control projection remotely, select the Web Remote option. You see a screen like this: Turns the projector on Turns the projector off Selects HDMI1, HDMI2, 3RCA (component), Video, and PC port sources Blank button control Switches between 2D and 3D projection...

  • Page 48: Using Basic Projector Features

    Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Viewing 3D Images Selecting the Language for the Projector Menus Adjusting the Image Height Image Shape Resizing the Image with the Zoom Feature Focusing the Image with the Lens Button Adjusting the Color Convergence (Panel Alignment)
  • Page 49 1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 3. Press the power button on the projector or the On button on the remote control to turn on the projector.

  • Page 50: Turning Off The Projector

    Turning Off the Projector Before turning off the projector, shut down any computer connected to it so you can see the computer display during shutdown. Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary depending upon mode selected, environmental conditions, and usage.

  • Page 51: Viewing 3D Images

    You can view 3D images using your projector. Viewing 3D images requires a 3D-compatible video device, a compatible HDMI cable, and a pair of Epson RF 3D glasses. You can also convert 2D images to 3D using the 2D-to-3D Conversion setting in your projector's Signal > 3D Setup menu.
  • Page 52 4. Press the 2D/3D button on the remote control to activate 3D mode, if necessary. 5. Slide the power switch on the 3D glasses to the On position. 6. Put on the 3D glasses. If you do not see a 3D image, pair the glasses with the projector. Note: If you change the video source or you are not within range of your projector, the glasses enter standby mode and the status light flashes green.

  • Page 53: Pairing The 3D Glasses With The Projector

    Optional Equipment and Replacement Parts Pairing the 3D Glasses with the Projector Pair the glasses with the projector to establish communication between them for 3D viewing. 1. Turn on the projector. 2. Set the image source to HDMI on the projector. 3.

  • Page 54: Charging The 3D Glasses

    Related tasks Selecting an Image Source Charging the 3D Glasses When the status light on the glasses flashes red to indicate a low battery, it is time to charge the glasses. 1. Connect the smaller end of the charging cable to the port on the bridge of the glasses. Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable.

  • Page 55: 3D Viewing Range

    3D Viewing Range When you view 3D images, make sure you are positioned within the viewing range shown here. 32 ft (10 m) Parent topic: Viewing 3D Images Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting.

  • Page 56: Adjusting The Image Height

    3. Select the Settings menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Adjusting the Image Height...

  • Page 57: Adjusting The Image Position Using Lens Shift

    2. If the image is tilted, rotate the front feet to adjust their height. 3. To adjust the position of the projected image further, press the Lens button on the remote control or projector until Adjust Lens Shift appears on the screen. If the projected image is unevenly rectangular, you need to adjust the image shape.
  • Page 58 2. Press the Lens button on the control panel or remote control. 3. Press the Lens button repeatedly until Adjust Lens Shift appears on the screen. 4. Press the arrow buttons to adjust the position of the projected image as necessary.

  • Page 59: Image Shape

    Center of lens Projected image when lens shift is set in the center Maximum vertical range (V × 90%) Maximum horizontal range (H × 40%) Note: You cannot move the image to both the horizontal and vertical maximum values. 5. When you are finished, press the Esc button on the control panel or remote control. Note: When adjusting the image height, position the image lower than where you want it to be and then move it up.

  • Page 60: Resizing The Image With The Zoom Feature

    2. Move the thumbstick on the control panel up or down to display the keystone adjustment sliders, then continue moving the thumbstick up or down to adjust the image shape. 3. Push in the thumbstick on the control panel to set the keystone value. After correction, your image is slightly smaller.

  • Page 61: Focusing The Image With The Lens Button

    2. Press the Lens button on the control panel or remote control. 3. Press the Lens button repeatedly until Adjust Zoom is displayed on the screen. 4. To resize the image, press and hold the left or right arrow button on the projector's remote control or use the thumbstick on the control panel.

  • Page 62: Adjusting The Color Convergence (Panel Alignment)

    2. Press the Lens button on the control panel or remote control. 3. Press the Lens button repeatedly until Adjust Focus is displayed on the screen. 4. To focus the image, press and hold the left or right arrow button on the projector's remote control or use the thumbstick on the control panel.
  • Page 63 4. Select the Panel Alignment setting and press Enter. 5. Select the Panel Alignment setting and press Enter. 6. Select On and press Enter. 7. Select the Select Color setting and choose one of the following: • R to adjust the red color convergence. •...
  • Page 64 You see this screen: 11. Press Enter.
  • Page 65 You see a screen like this: 12. Use the arrow buttons on the remote control to adjust the color alignment of the color you selected for the Select Color setting. 13. When you are finished adjusting the screen, press Enter. You see this screen: Note: Your adjustments affect the gridlines in the entire screen.
  • Page 66 14. Select Adjust the four corners and press Enter. (Otherwise, select Exit and press Enter.) 15. Use the arrow buttons on the remote control to adjust the color alignment in the corner of the screen highlighted by the orange box. 16.

  • Page 67: Remote Control Operation

    Parent topic: Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. You can point it at the screen, or the front or back of the projector. Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here.

  • Page 68: Selecting An Image Source

    Horizontal 32 feet (10 m) ± 30° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.
  • Page 69 3. Do one of the following: • Press the Source button on the projector until you see the image from the source you want.

  • Page 70: Projection Modes

    • Press the button for the source you want on the remote control. HDMI port sources PC port (VGA) source Composite video source Component video source Parent topic: Using Basic Projector Features Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly.

  • Page 71: Changing The Projection Mode Using The Menus

    Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus. 1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Settings menu and press Enter. 4.

  • Page 72: Changing The Image Aspect Ratio

    Changing the Image Aspect Ratio Available Image Aspect Ratios Parent topic: Using Basic Projector Features Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. Note: For HDMI sources, the input signal determines the image's aspect ratio. 1.

  • Page 73: Color Mode

    Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect ratio and resolution of your input signal. Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal. Normal Displays images using the full projection area and maintains the aspect ratio of the image.

  • Page 74: Changing The Color Mode

    Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use. 2. If you are projecting from a DVD player or other video source, insert a disc or other video media and press the play button, if necessary.

  • Page 75: Adjusting The Lens Iris

    Color Mode Description Bright Cinema Best for projecting in a room with closed curtains Natural Best for projecting in a dark room; perform color adjustment Cinema Best for movies and concerts projected in a dark room B&W Cinema Use for projecting in black and white Digital Cinema Uses the same color spectrum as digital cinema movie theaters Adobe RGB...

  • Page 76: Changing The Super-Resolution/4K Enhancement Setting

    3. Press the left or right arrow buttons on the projector's remote control to make adjustments. Note: Reducing the value increases the intensity of the colors in the image. The default values and settings differ based on the Color Mode settings and the zoom lens position. 4.

  • Page 77: Using Picture In Picture

    • Select a 4K Enhancement value of 4K-1 to 4k-5 to display 4K images (3840 × 2160) using 4K Enhancement Technology with super resolution processing to create ultra high-definition images. 4. Press the Sup Res/4K button again to exit. Parent topic: Using Basic Projector Features Related references Input Signal Settings - Signal Menu...

  • Page 78: Available Picture In Picture Options

    4. Press the P-in-P button again to exit. Available Picture in Picture Options Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Available Picture in Picture Options You can adjust the following options by pressing the Menu button on the remote control while using Picture in Picture: Setting Description...

  • Page 79: Adjusting Projector Features

    Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture Temporarily Locking the Projector's Buttons Saving Settings to Memory and Using Saved Settings Saving the Lens Position and Using Saved Lens Positions Shutting Off the Picture Temporarily You can temporarily turn off the projected picture if you want to redirect your audience's attention during a presentation.
  • Page 80 2. Select the Settings menu and press Enter. 3. Select the Lock Setting setting and press Enter. 4. Select one of these lock types and press Enter: • To lock the focus, zoom, and lens shift settings, select Lens Lock. Note: The lock icon is displayed on the screen if the Lens button is pressed while this setting is enabled.

  • Page 81: Unlocking The Projector's Buttons

    6. Restart the projector for the lock settings to take effect. Unlocking the Projector's Buttons Parent topic: Adjusting Projector Features Related references Projector Feature Settings - Settings Menu Unlocking the Projector's Buttons If the projector's buttons have been locked, hold the Enter button on the projector's control panel for seven seconds to unlock them.

  • Page 82: Saving The Lens Position And Using Saved Lens Positions

    4. Select one of the following options: • Load Memory: Overwrites your current settings with saved settings • Save Memory: Saves your current settings to memory (10 memories with different names are available) Note: A memory name that has already been used is indicated by a green mark. Saving over a previously saved memory overwrites the settings with your current settings.
  • Page 83 You see this screen: 5. Select one of the following options: • Load Lens Position: Overwrites your current focus, zoom, and lens shift settings with saved settings Note: You can load the saved settings from Memory1 or Memory2 by pressing the Lens1 or Lens2 buttons on the remote control.

  • Page 84: Adjusting The Menu Settings

    Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Memory Options - Memory Menu Projector Information Display - Info Menu Projector Reset Options - Reset Menu...
  • Page 85 You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3.

  • Page 86: Image Quality Settings - Image Menu

    Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description...
  • Page 87 Setting Options Description Contrast Varying levels available Adjusts the difference between light and dark areas of the image Color Saturation Varying levels available Adjusts the intensity of the image colors. Tint Varying levels available Adjusts the balance of green to magenta tones in the image.
  • Page 88 (Offset) and bright areas (Gain) of the image for each color RGBCMY: adjusts the hue, saturation, and brightness for each color EPSON Super White: reduces over-exposure of whites in your image; can be set only when Color Mode is set to certain color modes...

  • Page 89: Input Signal Settings - Signal Menu

    Note: The Brightness setting does not affect laser brightness. To change the laser brightness mode, use the Power Consumption setting. Parent topic: Adjusting the Menu Settings Related tasks Changing the Color Mode Adjusting the Lens Iris Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically.
  • Page 90 Setting Options Description 3D Setup 3D Display Selects various 3D options for 3D image sources 2D-to-3D Conversion 3D Display: enables 3D mode 3D Format 2D-to-3D Conversion: converts 3D Depth 2D images to 3D; set 3D Format Diagonal Screen Size to Auto or 2D Inverse 3D Glasses 3D Format: selects the 3D format...
  • Page 91 Setting Options Description Position Up, down, left, right Adjusts the image location on the screen Deinterlacing Sets whether to convert interlaced-to-progressive signals Video for certain video image types Film/Auto Off: for fast-moving video images Video: for most video images Film/Auto: for movies, computer graphics, and animation Motion Detection 1 to 5...
  • Page 92 Setting Options Description Super-resolution/4K Sharpens blurred images resulting from increasing 1 to 5 resolution 4K-1 to 4K-5 Super-resolution (1 to 5): reduces blurring when the image resolution is increased to 1920 × 1080 4K Enhancement (4K-1 to 4K-5): projects 4K images (3840 ×...
  • Page 93 Setting Options Description Advanced Noise Reduction Noise Reduction: reduces flickering in analog images in Setup Level three levels Overscan Setup Level: adjusts the level at HDMI Video Range which dark areas of the image are rendered black; leave this Color Space setting at 0% for most video Dynamic Range equipment or check your video...

  • Page 94: Projector Feature Settings - Settings Menu

    Related concepts Image Aspect Ratio Related tasks Changing the Super-resolution/4K Enhancement Setting Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Setting Options Description Keystone Varying levels available Adjusts vertical image shape to rectangular...
  • Page 95 Setting Options Description HDMI Link Device Connections Adjusts the HDMI Link options that allow the projector remote to HDMI Link control HDMI-connected devices Power On Link that support the CEC standard Power Off Link Device Connections: lists the devices connected to the HDMI1 and HDMI2 ports HDMI Link: enables or disables the HDMI Link function...
  • Page 96 Setting Options Description Projection Front Selects the way the projector faces the screen so the image is Front/Ceiling oriented correctly Rear Rear/Ceiling User Button 2D-to-3D Conversion Assigns a menu option to the User button on the remote 3D Depth control for one-touch access Inverse 3D Glasses Power Consumption Info...
  • Page 97 Setting Options Description Operation Direct Power On Selects various operation options Sleep Mode Direct Power On: lets you turn on the projector without pressing Illumination the power button Trigger Out 1 Sleep Mode: automatically Trigger Out 2 places the projector in standby mode after an interval of inactivity High Altitude Mode Illumination: turns off the lights...
  • Page 98 Setting Options Description Display Menu Position Selects various display options Menu Color Menu Position: adjusts the location where the menu is Messages displayed Display Background Menu Color: selects the color of Startup Screen the menu Standby Confirmation Messages: controls whether messages are displayed on the screen Display Background: selects...
  • Page 99 Setting Options Description Panel Alignment Panel Alignment Corrects color misalignment in the projected image Select Color Panel Alignment: enables Pattern Color adjustments for color Start Adjustments convergence (the alignment of the red and blue colors in the Reset projected image) Select Color: specifies the color convergence to correct Pattern Color: specifies the...

  • Page 100: Projector Memory Options - Memory Menu

    Projector Memory Options - Memory Menu Your projector comes with 10 memory locations where you can save customized settings for each of your video inputs to obtain the best picture quality. Setting Description Load Memory Displays the list of customized settings entries that you have created;...

  • Page 101: Projector Information Display - Info Menu

    Setting Description Rename Lens Position Renames a saved lens position entry Parent topic: Adjusting the Menu Settings Related tasks Saving Settings to Memory and Using Saved Settings Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu.

  • Page 102: Projector Reset Options - Reset Menu

    Information item Description Scan Mode Displays the scan mode Refresh Rate Displays the refresh rate of the current input source 3D Format Displays the 3D format of the signal Sync Info Displays information that may be needed by a service technician Color Depth Displays the color depth Color Format...
  • Page 103 You can erase all saved lens position entries using the Reset Lens Position option. You cannot reset the following settings using the Reset All option: • Input Signal - Component • Panel Alignment • Language • Memory settings • Saved lens position settings •...

  • Page 104: Maintaining And Transporting The Projector

    Air Filter and Vent Maintenance Replacing the Remote Control Batteries Parent topic: Maintaining and Transporting the Projector Cleaning the Lens Do not touch the projector lens. If the lens needs to be cleaned, contact Epson support. Parent topic: Projector Maintenance...

  • Page 105: Cleaning The 3D Glasses

    Projector Maintenance Air Filter and Vent Maintenance Regular filter maintenance is important to maintaining your projector. Your Epson projector is designed with an easily accessible, user-replaceable filter to protect your projector and make regular maintenance simple. Filter maintenance intervals will depend on the environment.

  • Page 106: Cleaning The Air Filter

    If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or laser.
  • Page 107 3. Press the tab on the air filter cover and pull to open the cover.
  • Page 108 4. Pull the air filter out of the projector. 5. Tap each side of the air filter 4 to 5 times to shake off any excess dust. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable.
  • Page 109 6. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust. Note: If dust is difficult to remove or the air filter is damaged, replace the air filter. 7. Place the air filter back in the projector as shown.

  • Page 110: Replacing The Air Filter

    8. Close the air filter cover and press until it clicks into place. 9. Replace the cable cover if necessary. Parent topic: Air Filter and Vent Maintenance Replacing the Air Filter You need to replace the air filter in the following situations: •...
  • Page 111 3. Press the tab on the air filter cover and pull to open the cover.
  • Page 112 4. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 5. Place the new air filter in the projector as shown.

  • Page 113: Replacing The Remote Control Batteries

    6. Close the air filter cover and press until it clicks into place. 7. Replace the cable cover, if necessary. Parent topic: Air Filter and Vent Maintenance Related references Optional Equipment and Replacement Parts Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out.
  • Page 114 1. Remove the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3.

  • Page 115: Transporting The Projector

    • When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Warning: The projector is heavy and should be carried or moved by two people.
  • Page 116 Parent topic: Maintaining and Transporting the Projector...

  • Page 117: Solving Problems

    • The lights on the projector may indicate what the problem is. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs.
  • Page 118 Temp light Laser light Status light Power light Power light Status light Laser light Temp light Status and solution Blue Blue Normal operation...
  • Page 119 • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • If the problem persists, unplug the projector and contact Epson for help...
  • Page 120 Flashing Flashing Cinema filter, static iris, or lens orange orange shutter error; turn the projector off, unplug it, and contact Epson for help Flashing blue Orange Orange Laser driver error; turn the projector off, unplug it, and contact Epson for...

  • Page 121: Solving Image Problems

    Solving Image Problems Check the solutions in these sections if you have any problems with projected images. Solutions When No Image Appears Solutions When "No Signal" Message Appears Solutions When "Not Supported" Message Appears Solutions When Only a Partial Image Appears Solutions When the Image is Not Rectangular Solutions When the Image Contains Noise or Static Solutions When the Image is Fuzzy or Blurry...

  • Page 122: Solutions When "No Signal" Message Appears

    • For images projected with Windows Media Center, reduce the screen size from full screen mode. • For images projected from applications using Windows DirectX, turn off DirectX functions. • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.

  • Page 123: Displaying From A Mac Laptop

    1. Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD. (See your laptop manual for details.) Wait a few seconds for an image to appear. To display on both the laptop's monitor and the projector, try pressing the same keys again. Note: On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.

  • Page 124: Solutions When Only A Partial Image Appears

    Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Try adjusting the image position using the Lens button on the remote control or control panel. • Press the Aspect button on the remote control to select a different image aspect ratio. •...

  • Page 125: Solutions When The Image Is Fuzzy Or Blurry

    • Check the settings on the projector's Signal menu to make sure they match the video source. If available for your video source, adjust the Deinterlacing and Noise Reduction settings. • Select a computer video resolution and refresh rate that are compatible with the projector. •...

  • Page 126: Solutions When The Image Brightness Or Colors Are Incorrect

    Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or light, or the colors are incorrect, try the following solutions: • Press the Color Mode button on the remote control to try different color modes for the image and environment.

  • Page 127: Solutions To Panel Alignment Problems

    Auto, but in some cases you may need to select a different setting to match the 3D signal from your video device. • Make sure you are using RF 3D active shutter glasses. You can purchase them from Epson. • Make sure your 3D glasses are turned on and fully charged. If the glasses have entered standby mode, slide the power switch on the glasses to the Off position and then back to the On position.

  • Page 128: Solving Projector Or Remote Control Operation Problems

    • Adjust the 3D Depth setting on the Signal menu. • Make sure you are within the 3D viewing range. • Make sure your screen size matches the Diagonal Screen Size setting on the Signal menu. • Avoid using the projector near wireless networks, microwave ovens, 2.4 GHz cordless phones, or other devices that use the 2.4 GHz frequency band.

  • Page 129: Solutions To Problems With The Remote Control

    • If you assigned an ID number to the remote control to operate multiple projectors, you may need to check or change the ID setting (feature not available with all projectors). • If you lose the remote control, you can purchase another from an authorized Epson reseller. Parent topic:...

  • Page 130: Solving Network Problems

    Related tasks Replacing the Remote Control Batteries Solving Network Problems Check the solutions in these sections if you have problems using the projector on a network. Solutions When Network Alert E-Mails are Not Received Solutions When You Cannot Access the Projector Through the Web Parent topic: Solving Problems Solutions When Network Alert E-Mails are Not Received...

  • Page 131: Where To Get Help

    Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

  • Page 132: Technical Specifications

    Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Light Source Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supported Video Display Formats General Projector Specifications Type of display Poly-silicon TFT active matrix Resolution...

  • Page 133: Projector Light Source Specifications

    Image size 30 inches (0.76 m) to 300 inches (7.62 m) (in native aspect ratio) Projection distance 32.7 inches (0.83 m) to 716.1 inches (18.2 m) (in native aspect ratio) Projection methods Front, rear, ceiling-mounted Optical aspect ratio 16:9 (width-to-height) Focus adjustment Powered Zoom adjustment...

  • Page 134: Remote Control Specifications

    Remote Control Specifications Reception range 32 feet (10 m) Batteries Two alkaline or manganese AA Parent topic: Technical Specifications Projector Dimension Specifications Height (excluding feet) 8.9 inches (225 mm) Width 21.7 inches (550 mm) Depth 21.8 inches (553 mm) Weight 39.7 lb (18 kg) Parent topic: Technical Specifications...

  • Page 135: Projector Environmental Specifications

    For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
  • Page 136 Display format Refresh rate (in Hz) Resolution (in pixels) Computer signals (analog RGB) 60/72/75/85 640 × 480 SVGA 56/60/72/75/85 800 × 600 60/70/75/85 1024 × 768 SXGA 70/75/85 1152 × 864 60/75/85 1280 × 960 60/75/85 1280 × 1024 WXGA 1280 ×...
  • Page 137 Display format Refresh rate (in Hz) Resolution (in pixels) SDTV (576i/576p) 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30/50/60 1920 × 1080 4K × 2K 24/25/30/50/60 3840 × 2160 50/60 4096 ×...
  • Page 138 Display format Chroma Color depth: 24 Color depth: 30 Color depth: 36 (refresh rate) subsampling bits (8-bit per bits (10-bit per bits (12-bit per (pixel encoding) pixel) pixel) pixel) 4K/24p (24 Hz) 4:4:4 4:2:2 HDR* 4:2:0 This signal does not exist. *This signal is processed at 4:2:2 10-bit.

  • Page 139: Notices

    Open Source Software License Binding Arbitration and Class Waiver Trademarks Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal. Parent topic:...

  • Page 140: Laser Safety Information

    • If an error occurs in the projector, turn off the power and unplug the projector immediately. Continuing to use the projector could result in an electric shock, fire, or visual impairment. Contact Epson support. • Do not attempt to disassemble or modify the projector. The projector contains a high-power laser component.
  • Page 141 • Pulse width Laser Optical Path Parent topic: Notices...

  • Page 142: Laser Optical Path

    Laser Optical Path When using the Lens Shift function, the laser light from the projection lens is diffused within the following range: When Lens Shift is at the maximum vertical position: 32° from the center of the lens When Lens Shift is at the maximum horizontal position: 34° from the center of the lens Parent topic: Laser Safety Information Important Safety Instructions...
  • Page 143 • If the projector is mounted on a ceiling or wall, it should be installed by qualified technicians using mounting hardware designed for use with this projector. • When installing or adjusting a ceiling or wall mount, do not use adhesives to prevent the screws from loosening and do not use oils or lubricants.
  • Page 144 • Except as specifically explained in this manual, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. • Never open any covers on the projector except as specifically explained in this manual. Never attempt to disassemble or modify the projector.

  • Page 145: 3D Safety Instructions

    • Before you move the projector, make sure its power is turned off, the plug is disconnected from the outlet, and all cables are disconnected. • Do not place the source of an open flame, such as a lit candle, on or near the projector. •...
  • Page 146 • Due to the possible impact on vision development, viewers of 3D video images should be age 6 or older. Children and teenagers may be more susceptible to health issues associated with viewing in 3D and should be closely supervised to avoid prolonged viewing without rest. •...

  • Page 147: Restriction Of Use

    • When charging the 3D glasses, only use the supplied charging cable and connect the cable to the USB port designated by Epson. Do not charge the 3D glasses using other devices as it may cause the battery to leak, overheat, ignite, or explode.

  • Page 148: Open Source Software License

    We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the GPL Programs, contact Epson as described in the User's Guide.
  • Page 149 0.9.8 uvc rev.219 wireless_tools 29 EPSON original drivers The GNU General Public License Version 2 is as follows. You also can see the GNU General Public License Version 2 at http://www.gnu.org/licenses/. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (c) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA...
  • Page 150 Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.
  • Page 151 c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.
  • Page 152 so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
  • Page 153 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
  • Page 154 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
  • Page 155 We provide the source code of the LGPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the LGPL Programs, please see the "EPSON Projector Contact List" in the User's Guide, and contact the customer support of your region.
  • Page 156 This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.
  • Page 157 We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries.
  • Page 158 Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it).
  • Page 159 In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
  • Page 160 Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6.
  • Page 161 It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7.
  • Page 162 It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices.
  • Page 163 THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
  • Page 164 BSD License (Berkeley Software Distribution License) This projector product includes the open source software program "University of California, Berkeley License (Berkeley Software Distribution License)" which applies the terms and conditions provided by owner of the copyright to the "BSD License". The "BSD License"...
  • Page 165 The "libjpeg" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of libjpeg programs libjpeg-6b License terms of conditions of each program which are provided by owner of the copyright to the "libjpeg"...
  • Page 166 (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library.
  • Page 167 The "libpng" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of libpng programs libpng-1.2.49 License terms of conditions of each program which are provided by owner of the copyright to the "libpng" are as follows.
  • Page 168 libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs...
  • Page 169 A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg" (88x31) and "pngnow.png" (98x31). Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.
  • Page 170 jloup@gzip.org Mark Adler madler@alumni.caltech.edu If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler;...
  • Page 171 "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
  • Page 172 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and (b) You must cause any modified files to carry prominent notices stating that You changed the files;...
  • Page 173 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if...
  • Page 174 The "newlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of newlib programs newlib 1.17.0 License terms of conditions of each program which are provided by owner of the copyright to the "newlib" are as follows.
  • Page 175 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  • Page 176 This software is the property of Advanced Micro Devices, Inc (AMD) which specifically grants the user the right to modify, use and distribute this software provided this notice is not removed or altered. All other rights are reserved by AMD. AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS SOFTWARE.
  • Page 177 Hewlett-Packard Company not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Hewlett-Packard Company makes no representations about the suitability of this software for any purpose. (9) Hans-Peter Nilsson Copyright (C) 2001 Hans-Peter Nilsson Permission to use, copy, modify, and distribute this software is freely granted, provided that the above copyright notice, this notice and the following disclaimer are preserved with no changes.
  • Page 178 This software is the property of SuperH, Inc (SuperH) which specifically grants the user the right to modify, use and distribute this software provided this notice is not removed or altered. All other rights are reserved by SuperH. SUPERH MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS SOFTWARE.
  • Page 179 OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (14) Alexey Zelkin Copyright (c) 2000, 2001 Alexey Zelkin <phantom@FreeBSD.org> All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 180 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  • Page 181 (18) Citrus Project Copyright (c)1999 Citrus Project, All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 182 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  • Page 183 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
  • Page 184 (28) Artem Bityuckiy (--enable-newlib-iconv) Copyright (c) 2003, Artem B. Bityuckiy, SoftMine Corporation. Rights transferred to Franklin Electronic Publishers. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 185 OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (31) - M.
  • Page 186 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;...
  • Page 187 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the company may not be used to endorse or promote products derived from this software without specific prior written permission.
  • Page 188 * Copyright (c) 2009 MIPS Technologies, Inc. * All rights reserved. * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 189 jquery.ui.touch-punch.js License terms of conditions of each program which are provided by owner of the copyright to the "MIT License" are as follows. Copyright (c) 2012 jQuery Foundation and other contributors, http://jquery.com/ Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the...
  • Page 190 Graduate School of Information Science, Nagoya Univ., JAPAN. The above copyright holder, limited to cases in which one satisfies conditions (1) ~ (4) below, or the conditions described in Version 2 of the GNU Public License officially announced by the Free Software Foundation, consents to the use, reproduction, alteration, and redistribution (hereafter called utilization) of this software (this software includes alterations, likewise below) without compensation.
  • Page 191 License terms of conditions of each program which are provided by owner of the copyright to the "TINET" are as follows. (1) FreeBSD Copyright (c) 1980, 1986, 1993 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.

  • Page 192: Binding Arbitration And Class Waiver

    1. DISPUTES, BINDING INDIVIDUAL ARBITRATION, AND WAIVER OF CLASS ACTIONS AND CLASS ARBITRATIONS 1.1 Disputes. The terms of this Section 1 shall apply to all Disputes between you and Epson. The term "Dispute" is meant to have the broadest meaning permissible under law and includes any dispute, claim,...
  • Page 193 1.3 Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you and Epson agree to try, for sixty (60) days, to resolve any Dispute informally. If Epson and you do not reach an agreement to resolve the Dispute within the sixty (60) days), you or Epson may commence an arbitration. Notice to Epson must be addressed to: Epson America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way,...
  • Page 194 Hearing Format. During the arbitration, the amount of any settlement offer made shall not be disclosed to the arbitrator until after the arbitrator determines the amount, if any, to which you or Epson is entitled. The discovery or exchange of non-privileged information relevant to the Dispute may be allowed during...
  • Page 195 Epson's last written offer, if any, to settle the Dispute, Epson will: (i) pay you $1,000 or the amount of the award, whichever is greater; (ii) pay you twice the amount of your reasonable attorney's fees, if any;...

  • Page 196: Trademarks

    Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

  • Page 197: A Note Concerning Responsible Use Of Copyrighted Materials

    Notices A Note Concerning Responsible Use of Copyrighted Materials Epson encourages each user to be responsible and respectful of the copyright laws when using any Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in certain circumstances, those circumstances may not be as broad as some people assume.

Table of Contents