Troubleshooting - Electrolux ERC3105 Instruction Book

TROUBLESHOOTING

Symptoms
The indicator light does not
light up.
The heater plate is not warm.
The KEEP WARM light does
not light up when the cooking
process is completed.
The rice is not cooked or cook-
ing time is taking too long.
The rice is too hard or too soft.
The rice is scorched.
The rice cooker does not auto-
matically
switch to keep warm mode.
www.electrolux.com
Possible Causes
The circuit of electric rice cooker
is not connected to power
supply.
The power wiring board is dam-
aged.
The circuit connection breaks
down.
The master circuit board is dam-
aged.
The heater plate is burnt out.
The light is defective.
Not enough water is added.
Cooking time is insufficient.
The inner pot is not properly in
contact with the heater plate.
Possible foreign matter between
the inner pot and heater plate.
The heater plate is damaged.
Not enough or too much water
has been added.
The rice has not been rinsed
well.
The master temperature control-
ler is defective.
The master temperature control-
ler is defective.
Solutions
Check that the switch, plug and
socket, fuse and leading wire of
the power supply are in good
condition and properly con-
nected to the mains and if plug
is inserted firmly into the wall
socket.
Contact authorized service
center.
Add water to the level indicated
on the scale inside the inner pot
that corresponds to the number
of cups of rice used.
Press down the control lever to
start the cooking process.
Make sure there is no foreign
residue on the heater plate.
Contact authorized service
center.
Add water to the level indicated
on the scale inside the inner pot
that corresponds to the number
of cups of rice used.
Rinse the rice until water runs
clear.
Contact authorized service
center.
Contact authorized service
center.
EN
ID
TH
VN
CNS
5