Removing The Covers; Removing The Indoor Unit Covers; Removing The Indoor Unit Front Cover; Removing The Indoor Unit Lateral Cover - Hitachi RWH-4.0VNFE Instruction Manual

UNIT INSTALLATION

6.2 REMOVING THE COVERS

If it is necessary to access to the indoor unit components, please
follow these operations.

6.2.1 Removing the indoor unit covers

?
N O T E
• The pictures shown correspond to the YUTAKI S80 TYPE 1, but the
procedure for removing covers is exactly the same for the TYPE 2
except in case of lateral covers.
• Front cover needs to be removed for any task inside the indoor unit.
• Back cover does not need to be removed.


Removing the indoor unit front cover

1 Unscrew the 2 fixing screws at the lower side.
2 Pull the indoor unit front cover forward and then remove it.

Removing the indoor unit upper cover
1 Remove the indoor unit front cover.
2 Unscrew the 2 upper fixing screws.
24 PMML0340B rev.1 - 03/2016
3 Pull the indoor unit upper cover forward and then remove it.


Removing the indoor unit lateral cover

?
N O T E
Pictures refer to the left side cover, but the removal procedure is exactly
the same for the right side cover.
1 Remove the indoor unit front cover.
2 Remove the indoor unit upper cover.
3 Unscrew the screws which fix the cover to the indoor unit.
TYPE 1 (5 screws)
TYPE 2 (6 screws)