Table of Contents
Advertisement
7
Adjust the back rest, seat and foot rest.
When adjusting automatically
Press the ZERO-G button (flashing).
¡The ZERO-G button will illuminate and the back
rest, seat and foot rest will move automatically
to their preset angles.
What is ZERO-G?
This is a term for the posture which is the most stable
position for the body and is the ideal position for massage.
¡If you would like to change the angle from the
ZERO-G position, press the RECLINING button or
the FOOT REST button.
WARNING
CAUTION
Stopping the massager during ZERO-G adjustment
Press the ON/OFF button.
(It can also be stopped by pressing the ZERO-G button, HOME button, RECLINING button or FOOT REST button.)
Stopping the chair immediately if you feel an abnormal physical sensation or a problem with the chair itself
Press the STOP button.
The massaging rollers will
move to the widest position and
then stop. Other operations will
stop immediately.
Note:
¡Do not attempt to recline the back rest while your legs are being held by the air bags during leg massaging.
In addition, do not pull your legs out forcibly. If this is not observed, injury to the legs may occur.
¡If you press the HOME button while the seat is raised, the foot rest may lift up slightly before it is lowered, to
ensure that children or pets do not get caught underneath it.
Adjustment range
(approximately 80°)
¡Be sure to check that there is no-one (children in particular), or any pets under the foot
rest and that there are no other obstructions in the way before reclining the massager.
¡At first, do not attempt to recline the seat deeply or lean on the back rest forcibly (until you
have become accustomed to massaging).
Restarting operation
qPress the RECLINING button or the HOME button to return the massager
to the home position.
wPress the ON/OFF button.
The massaging rollers will move to their highest position and then stop.
eTo have a massage, press a button to select a massage course.
When adjusting manually to the desired angle
Press the RECLINING button to adjust the angle of the
back rest to the desired angle.
While the left side of the button is pressed, the back rest
will lift up and the foot rest will drop.The seat will also
move in conjunction with the back rest and foot rest.
When the right side of the button is pressed, the back
rest will drop and the foot rest will lift up. The seat will
also move in conjunction with the back rest and foot rest.
120°
Foot rest
Adjustment range
(approximately 50°)
Back rest
10
Advertisement
Table of Contents
