Operating With A Web Browser - Canon CS100 Instruction Manual

Operating with a Web Browser

You can view albums and send still photos from a terminal such as a smartphone,
tablet, or computer. To perform an operation, display the operation screen in the Web
browser on the terminal.
To use this function, you need to connect Connect Station to an access
point, router, etc. in advance (p.16, 49). Also, you need to connect the
terminal to the same access point, router, etc. as Connect Station in
advance.
The images that can be viewed on the terminal are only those that are managed
as albums in Connect Station.
Up to five terminals can be connected at a time.
Browsers
The following operating systems and Web browsers have been confirmed to be
compatible with this device. Depending on your environment, operation may differ.
Windows 8, Windows 7: Chrome version 38
iOS (OS version 6/7): Safari
* The function is not available when Private Browsing is enabled.
Android (OS version 4.2): Chrome version 28
* Operation on the above operating systems and Web browsers cannot be guaranteed for all
the terminals.
* If JavaScript is disabled by the Web browser setting, images will not be displayed properly.
Displaying the Operation Screen
Displaying by Using the NFC Function
An NFC-compatible Android smartphone or tablet (OS version 4.2 or later)
supporting Android Beam allows you to display the operation screen by using the
NFC function.
A terminal having n (N-Mark) is compatible with NFC. Note that some NFC-
compatible terminals do not have n. If you are not sure whether your terminal
supports NFC, contact its manufacturer.
Set the terminal in advance so that the NFC function can be used, and make sure
you know where the NFC antenna is located. For information on the setup
procedure, refer to the terminal's instruction manual.
Operation using the NFC function cannot be guaranteed for all the terminals. If
you cannot display the operation screen using the NFC function, see "Displaying
by Entering an IP Address" (p.42).
40