Cisco SCE 8000 Installation And Configuration Manual page 245

Appendix C Cisco Service Control Engine System Log Messages
Warning Message %LOCAL7-4-DEBUG_SSH_ACCESS_FAILED: "Fail to %s debug-ssh (port
2200)"
Explanation
from the remote machines.
Recommended Action
Warning Message %LOCAL7-4-BIND_VTY_SERVICE_FAILED: "Fail to bind telnet service to
management vlan (%u) and address (<%s>)"
Explanation
corresponding management VLAN.
Recommended Action
Warning Message %LOCAL7-4-UNBIND_VTY_SERVICE_FAILED: "Fail to un-bind telnet
service from management vlan (%u)"
Explanation
corresponding management VLAN.
Recommended Action
Warning Message %LOCAL7-4-BIND_SSH_SERVICE_FAILED: "Fail to bind ssh service to
management vlan (%u) and address (<%s>)"
Explanation
management VLAN.
Recommended Action
Warning Message %LOCAL7-4-UNBIND_SSH_SERVICE_FAILED: "Fail to un-bind ssh service
from management vlan (%u)"
Explanation
management VLAN.
Recommended Action
Warning Message %LOCAL7-4-BIND_SNMP_SERVICE_FAILED: "Fail to bind SNMP service to
management vlan (%u) and address (<%s>)"
Explanation
management VLAN.
Recommended Action
This message is displayed when Cisco SCE fails to enable Cisco SCOS SSH access
None.
This message is displayed when the Cisco SCE fails to bind the telnet service to a
None.
This message is displayed when Cisco SCE fails to unbind the telnet service from the
None.
This message is displayed when Cisco SCE fails to bind the SSH service to a given
None.
This message is displayed when Cisco SCE fails to unbind the SSH service to a given
None.
This message is displayed when Cisco SCE fails to bind the SNMP service to a given
None.
Warning Messages, Severity Level 4
Cisco SCE8000 GBE Installation and Configuration Guide
C-49