Advertisement
✦ Recording your personal outgoing message
However, if you do so, you will permanently erase the pre-recorded
outgoing message.
✦ Recording a memo
If you want to leave a local message for your family :
✦ Selecting the answerphone mode
You can select either answering mode only (which plays an outgoing message but
does not take messages) or answering & recording mode (which takes messages.)
answering &
recording mode
Advice: prior to using the answering-only mode, make sure that you have adapted the outgoing message.
Screening the calls while a message is being left
This allows you to listen to any caller leaving a message and to decide whether or
not to take the call.
✦ Activating call screening
From the handset :
✦ Deactivating call screening
From the handset :
✦ Increasing the volume of the call screening
During call screening, the volume can be adjusted. 4 volume levels are
available, including silent.
Press
until you have reached the desired volume.
✦ Call interception
The recording of the current message is stopped and the call is taken.
www.philips.com/faqs/dect
10
speak after the beep
speak after the beep
or
to switch between modes To exit
answering only mode
*You will hear
the personal
*
outgoing
To exit
message.
This local
message
(memo) is
treated like all
other
To exit
answerphone
messages.
The last
selected level
will be
registered for
the next call.
When the
answerphone
is on-line,
blinks.
Hide quick links:
Advertisement
