Interface Cable Connection; Cash Drawer Connection; Media Loading - Pioneer STEP-5e User Manual

STEP-5e User Manual
Notes：
► Use only the power adapter recommended by supplier or equivalent products;
► When disconnecting the AC adapter plug, hold on to the housing part of the plug. Avoid pulling
on the cable.
► Avoid drag the power adapter cable to prevent damage on the cables
► Avoid putting power adapter around a heating device
► When printer is not in used for long period of time, disconnect the power supply of printer power
adapter.

4.4 Interface Cable Connection

1) Make sure the printer's power switch is turned off;
2) Put the interface cable into the matched interface and fixed with screws (or spring) on the plug;
3) Connect the other end of the interface cable to the host.

4.5 Cash Drawer Connection

1) Make sure the printer's power switch is turned off;
2) Connect the cash drawer cable into the cash drawer interface on the rear side of the printer.
Warning: Cash drawer interface can only be connected to a voltage of 24V cash drawer
device (can't connect to the phone line or 12V drawer, etc.)

4.6 Media Loading

Confirm the type of paper used by the printer before printing. The default paper type can be used
should be thermal paper. Install paper guide as needed based on print width requirement.
Page 11