Dell W2306C Owner's Manual page 92

Problem
No sound
Double image or no image with DVD
Picture is too dim or too bright
The screen is not centered correctly
92
Troubleshooting Your Wide LCD Monitor
Possible Solution
Ensure mute is not turned on. Pressing the Mute button on
1
the remote control turns the mute function on and off.
If only certain TV channels do not have sound, then you need to
2
correct the Input Select menu in the TV Menu (see "Input
Select Menu" on page 85).
Verify that the audio cables are firmly connected to both the
3
audio input connectors on your wide LCD monitor and audio
output connectors on your devices. Ensure that the cable colors
match the connectors colors.
Also, ensure that the audio cables are connected to the same
4
row as the video cables. See "About Your Wide LCD Monitor"
on page 65 for the location of the connectors.
Reconnect the device using the same type of connector. For
5
example, if you are using the composite connector on the
bottom, try connecting the device to the composite connector
on the side of the wide LCD monitor. See "About Your Wide
LCD Monitor" on page 65 for the location of the connectors.
After you connect the device, change the input source in the TV
Menu. See "Input Select Menu" on page 85 for more
information.
Connect the device using a different connector. For example,
6
if you are experiencing the problem using a composite
connector, try using the component or D4 connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select Menu" on page 85 for more
information.
Test the device on a different TV.
7
Turn off the progressive scan on the DVD player. Your Dell™
Wide LCD Monitor offers built-in deinterlacer that is equal to or
better quality than the deinterlacer on your DVD player. For
more information about progressive scan on your DVD player,
see the documentation for your DVD player
Update the color settings in the TV Menu. Press Menu on the
remote control and select Picture.
Update the size settings in the TV Menu. Press Menu on the
1
remote control and select Size.
Reset the original factory defaults. Press Menu on the remote
2
control, select Setup, and then select Factory Reset.