How To Clean The Pleat Filter; Storage Instruction - Toshiba VC-GC32BSA Owner's Manual

2. How to clean the pleat filter

① Turn the cup cover to the mark "
direction of the arrow to remove it.
Cup
cover
③ Press the button on both sides of the pleat
filter to disassemble it.
Button
* The pleat filter could be cleaned after cleaning the
dust cup.
* When emptying any vacuum cleaner it is difficult to avoid exposure to dust. To minimize this risk, please ensure
that you encase the dust cup in a large bag to empty it and close the bag as tightly as possible round the dust cup.
Remove the dust cup and close the bag as tightly and quickly as possible and dispose of this immediately. It is
advisable to wear disposable gloves and a face mask while emptying the cleaner. If at all possible, ask a non
allergy sufferer to empty the dust cup when required.

Storage Instruction

Store the vacuum cleaner as the following way after use.
Stand Holder
Hole
22
141114c1_VC-GC32BSA.indb 22
② Slide the dust cleaning slider right and left for
" in the
about 5 times.
④ Remove the dust attached on the pleat filter
using the cleaning brush and then empty the
separation net.
Button
* Do not press the cup button when emptying the
separation net to avoid dropping.
Storage Methods:
① Wind the hose to the telescopic wand.
② Pull the floor head close to the appliance body.
③ Insert the stand holder into the hole of the
appliance while keeping the telescopic wand
stand straight.
Dust cleaning slider
2014/11/14 16:11:47