Consumer Information; Remove Packaging - GE ZDBG240 Owner's Manual

The warranty does not cover damage
If you
caused after delivery.
received a
damaged
appliance
Before using, be sure all packing materials
Remove
and tape have been removed.
packaging
To assure no damage is done to the finish
of the product, the safest way to remove
the adhesive left from packaging tape on
• Promptly inspect your new Monogram
After
installation
is completed
• This Beverage Center must be properly
• The unit should be centered in the
Beverage Center. If it has been damaged,
contact the Installer or Dealer
immediately.
leveled to ensure correct door alignment
and door closure. Contact the Installer
if the unit is not level.
opening. The front face of the door
should be 25 mm forward of adjacent
cabinetry. Contact the installer if
clearance is not correct.

Consumer Information

Beverage Center
Immediately contact the dealer (or
builder) that sold you the beverage center.
new appliances is an application of
household liquid detergent. Apply with
a soft cloth and allow to soak. Wipe dry
and then apply an appliance polish to
thoroughly clean and protect the surface.
• Test the door swing. Carefully open and
close the door. The door should not rub
or catch on adjacent cabinetry. Notify
the installer if the door makes contact
with cabinetry.
Please Contact the Installer or Dealer if
you experience any of these problems.
Your Beverage Center is shipped with
a black toekick on the front of the unit.
For shipping purposes, an optional
stainless steel toekick is secured to the
back of the unit. That toekick should have
been removed and installed, or given to
you. Keep the unused toekick and other
unused or removed parts for possible
future use.
3