How To Use The Timer Menu Controls - Philips 26PW9100D User Manual

HOW TO USE THE TIMER MENU CONTROLS

Y Y Y Y Y
our television comes with an onscreen clock. The TV can also be set to turn on or off at a specific time and tune our television comes with an onscreen clock. The TV can also be set to turn on or off at a specific time and tune
to a specific channel when it powers itself on. to a specific channel when it powers itself on.
1
Press the MENU button on the remote
control to display the onscreen menu.
2
Press the CURSOR < or > button until
Features is highlighted.
3
Press the CURSOR > button to
display the Features menu.
4
Press the CURSOR > button to
display the Timer menu.
5
Press the CURSOR > button to
access the Timer menu.
6
Press the CURSOR < or >¸ until one
of the Timer controls (Time, Start Time,
Stop Time, Channel, Activate, or Display) is
highlighted.
7
Press the CURSOR > button to display
the menu for the selected item
Make adjustments to the selected items by
following the steps below.
Time: Enter the current time using the
NUMERIC buttons. Use the CURSOR
> or < to toggle the AM and PM setting.
Start Time: Use the NUMERIC buttons to
enter the time you want the TV to turn itself
On. Use the CURSOR > or < to toggle the
AM and PM setting.
Stop Time: Use the NUMERIC buttons to
Stop Time:
enter the time you want the TV to turn itself
Off. Use the Off Off. Use the CURSOR > or < to toggle the
AM and PM setting.
Channel: In Digital Mode, use CH + or
CH- to select DTV which is the last viewed
digital channel. In Analog Mode, use the
NUMERIC buttons or the CH + or CH-
buttons to enter the startup channel.
Activate: Set the timer to turn itself Off,
Once or Daily. Press the CURSOR > or <
to select Once, Daily, or Off.
Display: Display: Press the CURSOR > or < to
toggle between On or Off. If
the time will be displayed all the time when
the TV is on. When Off is selected, the time
will only appear when the INFO button is
pressed.
NOTE : Display is not available in Digital Mode.
8
Press the MENU button on the remote
control three times to remove the onscreen
menu from the TV screen.
Off, Off
Off Off.
Off Off. If On is selected,
Off Off is selected, the time
Digital Mode
DTV
In Digital Mode : Before you turn off the In Digital Mode
TV you have to switch to the desired digital
channel because the TV will wake up in the last
viewed digital channel.
In Analog Mode : You can specify which
channel to wake up to.
18
Analog Analog Mode Analog Mode
MENU
< >
NUMERIC
BUTTONS
H H
ELPFUL INTS
: Before you turn off the