Specifications - Panasonic AW-RP50E Operating Instructions Manual

Specifications

Power requirements: DC 12 V 10 %
(AC adapter provided)
Power consumption: DC 12 V, 0.5 A
 GENERAL 
Ambient operating temperature:
0 °C to +40 °C
Allowable humidity ranges:
10 % to 90 % (no condensation)
Mass:
Approx. 1.1 kg
Dimensions (W  H  D):
210  67  177 mm
[excluding protrusions]
 Input/Output connector 
LAN (RJ-45):
10BASE-T/100BASE-TX
Connecting cable: LAN cable, max. 100 meters
  When the unit is connected via a switching hub:
Straight cable (category 5 or above), STP (Shielded
Twisted Pair) cable recommended
  When the unit is connected directly:
Crossover cable (category 5 or above), STP
(Shielded Twisted Pair) cable recommended
TO PAN/TILT HEAD (RJ-45):
RS-422 (control signals for remote cameras)
Connecting cable:
Straight cable (category 5 or above)
max. 1000 meters
TALLY/GPI (D-sub 15-pin, female, inch thread):
TALLY IN:
5 inputs (for receiving photocoupler signals)
GPI IN:
4 inputs (for receiving photocoupler signals)
GPI OUT:
4 outputs (open collector outputs, negative logic)
indicates safety information.
 AC adapter 
Input:
AC 100 V to 240 V, 1.5 A, 50/60 Hz
Output:
DC 12 V, 2.5 A, 30 W
Mass and dimensions shown are approximate.
Specifications are subject to change without notice.
33 (E)