The Permanent Function Buttons; Drop; Conf; Tran - Fujitsu 9924 Quick Reference User Manual

I.

THE PERMANENT FUNCTION BUTTONS

: Pressing these buttons will;
or
1. Decrease/Increase the volume of the receiver when it is being used.
2. Decrease/Increase the volume of the speaker when the SPEAKERPHONE
function is being used.
: Pressing this button while on an active call will disconnect the call and

DROP

open the line for another outgoing call (you will receive dialtone again). If you are on
a 3-way conference call, it will drop the last call added.
(Conference): To make a 3-way conference call:

CONF

DIAL:
PRESS:
receive and open line with dialtone (if you don't, manually select an available line – if
no line is available you will not be able to complete the conference call);
DIAL:
PRESS:
(Transfer): To transfer a call to another extension:

TRAN

PRESS:
and open line with dialtone (if you don't, manually select an available line – if no line is
available you will not be able to complete the call transfer);
DIAL:
the call;
PRESS:
will be dropped.
:
The set will automatically dial the last number called when this button is pushed.

REDIAL

:
Pressing this button will place the call on HOLD.

HOLD

(Located on the bottom left of your set)
The first number and wait for the call to connect;
The button (this will place the first call on HOLD), you will then
CONF
The second number and wait for the call to connect;
The button again and all 3 lines will be connected.
CONF
The button (this will place the call on HOLD) you will then receive
TRAN
The extension you want to transfer the call to and wait to connect, announce
The button again and the call will be connected through and you
TRAN
3