E-Mail Integration Settings - Panasonic KX-TVM50 Getting Started

4.5 E-mail Integration Settings

4.5 E-mail Integration Settings
The VPS can be programmed to send text and voice messages (as file attachments) to subscribers
when they have new messages. The following settings must be made in order for the VPS to use E-
mail Integration features. Consult the LAN administrator for the appropriate settings.
System Settings for E-mail Integration
1.
Start KX-TVM Maintenance Console and connect to the VPS.
2.
Click System Parameters (under Shortcuts), then click the Parameters tab.
3.
Set E-mail Integration to Enable.
4.
Enter an e-mail address next to Mail Address.
Note
• We recommend entering an administrator's e-mail address here. If there are any errors
when the VPS tries to send e-mail messages, error messages will be sent to this address.
5.
Enter the name that will appear in e-mail messages sent from the VPS next to Full Name. This
name should indicate that the message came from the VPS.
6.
Enter the outgoing mail server address next to SMTP Server Address.
Note
• If authentication is required when accessing the outgoing mail server (SMTP server), make
the appropriate settings under Advanced Settings.
48 Getting Started