Rerecording (Tape Duplication) - Philips CCC134 Owner's Manual

32 Rerecording (Tape Duplication)

AUDIO and VIDEO OUT Jacks on source unit
(VCR, DVD Player, or Camcorder)
VIDEO AUDIO
1
Make the connections shown above, using audio and video
cables (not supplied). Make sure the source unit (VCR, DVD
Player, camcorder, etc.) is connected to a power source.
2
The source unit will play your tape. Insert a prerecorded tape
in the source unit. If playback begins, press the STOP button on
the unit.
3
The TV/VCR will record your tape. Insert a blank tape in the
TV/VCR. Make sure the tape's record tab is intact. The TV/VCR
power will turn on automatically.
4
Point the TV/VCR remote control at the TV/VCR. Press
the COMBI button, then press Number buttons 0, 0 so
that A/V IN appears on the screen.The TV/VCR is now in
Line Input mode.
5
Point the TV/VCR remote control at the TV/VCR. Press
the SPEED button until the desired tape speed (SP or
SLP) appears on the screen.
6
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
7
To stop copying, press the STOP/EJECT button on the
TV/VCR, then stop the tape on the source unit.
OUT
Audio Cable from
AUDIO OUT to AUDIO In
Video Cable from
VIDEO OUT to VIDEO In
AUDIO
EARPHONE
AUDIO and VIDEO In
Jacks on TV/VCR
Helpful Hints
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• If a program has copyright protec-
tion, it may not record clearly.
• Different brands of equipment may
operate differently.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
STOP REW
VIDEO
EJECT