Recording 29; Recording Options - Philips CCC192AT Owner's Manual

Read and follow the steps below to record a TV program.
1
Place a tape with its record tab intact (see page five) in the
TV/VCR. The power will come on. Or, if the tape is already in
the TV/VCR, press the POWER button to turn on the
TV/VCR, if necessary.
2
Press the SPEED button until the desired tape speed
appears on the TV/VCR screen. See tape speed details below.
3
o
Use the CH(annel)
select the channel you want to record. You can not change
channels during recording.
4
Press the REC(ord)/OTR button once to start recording.
The Record light will glow.
If there is not a tape in the TV/VCR, NO CASSETTE flashes on
the screen briefly.
If the tape does not have a record tab, PROTECTED CASSETTE
CANNOT RECORD flashes on the screen briefly. The TV/VCR
will eject the tape. Insert another tape.
5
To pause the recording (for example, during commercials),
press the PAUSE/STILL button. The Record light will flash. To
resume recording, press the PAUSE/STILL button again or
the REC(ord)/OTR button. The Record light will glow.
6
To stop recording, press the STOP/
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (T160, T120, and T60). There are three playback
speeds: SP, LP, and SLP. A tape will play only in the speed in which
it was recorded. When recording, you can change the tape speed
using the SPEED button. You cannot record in LP speed.
The slower the speed, the more programming you can fit on the
tape. SLP is the slowest speed.
Cassette type / Playback Time
Tape Speed T160
SP 2 hrs.
(Standard Play)
40 mins.
LP 5 hrs.
(Long Play)
20 mins.
(playback only)
SLP
(Super Long Play)
8 hrs.
p
/ buttons or the Number buttons to
button.
T120 T60
2 hrs. 1 hr.
4 hrs. 2 hrs.
6 hrs. 3 hrs.

Recording 29

1
EJECT
POWER
MENU STATUS/EXIT CLEAR
1 2 3
4 5 6
7 8 9
SLEEP/
ALT.CH
WAKE UP
0
3
REC
PAUSE
/OTR
/STILL
PLAY
REW F.FWD
STOP
CH.
MUTE
SPEED
TRACKING MEMORY
Helpful Hints
• You cannot record one channel while
watching another.
• Recording options are on pages
30-36.
• You cannot record if DEFEAT
RECORDING is ON. (REC
DEFEATED will flash on the screen.)
Details are on page 36.
• If you pause a recording for more
than five minutes, the TV/VCR will
switch to Stop mode automatically to
protect the video cassette tape from
damage.
• You can change the tape speed with
the SPEED button while a recording is
in progress, but some distortion may
appear on the tape.
4
5
6
VOL.
2