JVC BD-X200E Instructions Manual page 83

Dubbing
Setup Procedures
Sender device : Insert a finalized disc.
Receiver device : Insert a blank DVD.
Procedure
Use the DUBBING screen to carry out the dubbing of DVDs.
DUBBING screen
1. 2.
DUBBING
MENU
DVD † DVD
2.
DVD † DVD dubbing screen
Sender device
DVD † DVD
RECEIVER Searching . . .
SENDER IP ADDRESS † 192:168:000:002
ABORT
Receiver device
DVD † DVD
SET SENDER IP ADDRESS
192 168 000 002
RECEIVER IP ADDRESS † 192:168:000:003
3.
DVD † DVD
SET SENDER IP ADDRESS
192 168 000 002
RECEIVER IP ADDRESS † 192:168:000:003
IP address for the sender device
1.
Sender and receiver devices
Open the DUBBING screen on both the sender and receiver devices.
q Press the SET UP button to display the Main Setup menu.
EXECUTE
w Use the 6 and 7 buttons to select DUBBING and then press the SET
button.
● The DUBBING screen will appear.
2.
Sender and receiver devices
On both the sender and receiver devices, set DVD † DVD from the
DUBBING screen to EXECUTE and press the SET button.
Sender device:
● Search for the receiver device. (☞ Page 82)
Receiver device:
● A confirmation box for the sender device's IP address is displayed.
SENDER
To end dubbing:
Sender device
Receiver device : Press the SET UP button to return to the normal screen
3.
Receiver device
Set the IP address for the sender device as follows.
q Use the on-screen confirmation box to set the required IP address.
RECEIVER
● The IP address of the currently-registered sender device will be displayed.
Press the SET button to use this IP address.
w If setting a new sender-device IP address, set the IP address of the sender
SET
device.
● Use the t and 8 cursor buttons to select the digit to be changed.
● Press the cursor (6/7) buttons to set the value of the selected digit.
● Repeat the above for all digits, select SET using the 8/t buttons and
press the SET button.
● The sender-device IP address set using this dialog box will be registered
as the most up-to-date address on the receiver device.
RECEIVER
SET
SENDER IP ADDRESS † 192:168:000:002
: Select ABORT and press the SET button.
The normal screen display will return.
display.
● When all of the necessary settings have
DVD † DVD
RECEIVER
been made, the status of the sender device
will be displayed on the receiver device's
Searching . . .
monitor.
ABORT
● This screen will not appear when setting
the sender device first.
E-81