Philips BDP5012 Quick Start Manual

Troubleshooting

No reaction to the remote control.
Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries correctly.
Insert new batteries in the remote control.
Cannot play back a disc.
Make sure that the product supports the disc.
Make sure that the Blu-ray Disc player supports the region code of the DVD or BD.
(BD: A: DVD: All or 1)
For DVD+RW/+R, make sure that the disc is finalized.
Clean the disc.
No video signal on the display device.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution using [HDMI].
Press and hold [B (PLAY)] on the front panel for 5 seconds to change the setting back
to its default.
No 5.1-channel audio from the loudspeakers of the audio system.
Does the disc contain 5.1-channel audio? The 5.1-channel audio is not available when
the disc does not contain it.
Does the audio system support 5.1-channel audio? The 5.1-channel audio is not
available when the audio system does not contain it.
In the settings menu, set "HDMI Audio" to "Off".

Need help?

User Manual
See the user manual that came with your Philips Blu-ray Disc
Player.
Online
Go to www.philips.com/welcome.
Hotline
Call 1-866-309-0866 for our operators.
Be responsible
Respect copyrights
Philips and Philips Shield are used
under license of Koninklijke Philips
Electronics NV.
Printed in China
JpnMF-0914/F7-3
E5K16UD_E5K17UD
★★
1VMN27440A
BLU-RAY DISC PLAYER

Quick Start Guide

What's in the box?
Blu-ray Disc Player
HDMI cable (High Speed HDMI Cable) RCA Audio / Video Cables
BDP5012
1
Connections
2

Basic Setup

3
Enjoy
User Manual
Remote Control with
User Manual
Batteries (AAA x 2)
Registration Card
Quick Start Guide