Product Icons; Chapter 1 Introduction - GE LOGIQ 9 Technical Manual

GE M S
EDICAL YSTEMS
D 2294854-100, R
IRECTION
1-2-3

Product Icons

The following table describes the purpose and location of safety labels and other important information
provided on the equipment.
Table 1-5
LABEL/SYMBOL
Identification and Rating Plate
Device Listing/Certification Labels
Type/Class Label
IP Code (IPX8)
"CAUTION
This unit weighs...
Special care must be used to avoid..."
PROPRIETARY TO GE
3
EVISION
Product Icons
PURPOSE/MEANING
Manufacturer's name and address
Date of manufacture
Model and serial numbers
Electrical ratings
Laboratory logo or labels denoting
conformance with industry safety standards
such as UL or IEC.
Used to indicate the degree of safety or protection.
Indicates the degree of protection provided by
the enclosure per IEC 529. IPX8 indicates drip
proof.
Equipment Type BF (man in the box symbol)
IEC 878-02-03 indicates B Type equipment
having even more electrical isolation than
standard Type B equipment because it is
intended for intimate patient contact.
Equipment Type CF (heart in the box symbol)
IEC 878-02-05 indicates equipment having a
high degree of protection suitable for direct
cardiac contact.
This precaution is intended to prevent injury
that may result if one person attempt to move
the unit considerable distances or on an incline
due to the weight of the unit.
"CAUTION" The equilateral triangle is usually
used in combination with other symbols to
advise or warn the user.

Chapter 1 Introduction

LOGIQ™ 9 P
ROPRIETARY
LOCATION
Rear of console near power inlet
Under monitor
On each probe
Rear of console
Under front of monitor
Footswitch
Probe connectors
PCG connector
or Rear of Console
ECG connector
Surgical probes
On the console where easily seen during transport
Various
M
ANUAL
1-5