NEC E656 User Manual page 22

1-4. When the external device is connected to another terminal (HDMI,
component video, composite video), the NO SIGNAL menu is displayed
and 10 seconds later the Monitor switches to Auto Power save mode.
1-5. For example, In Auto Power save mode at HDMI-1 terminal, when
the Monitor receives a signal from an external HDMI-1 device, it
switches automatically to ON mode.
1-6. For example, In Auto Power save mode at HDMI-1 terminal, when
the Monitor does not receive a signal from external HDMI-1 device, after
30minutes, it switches automatically to Auto Standby mode.
1-7. For example, In Auto Standby mode at HDMI-1 terminal, press the
power button on the remote control or on the side panel to switch the
Monitor to ON mode.
NOTE:
For example, Note that in Auto Power save mode at HDMI-1 terminal, the
Monitor does not switch automatically to ON mode even if a signal is input
from an external device using VGA, HDMI-2, HDMI-3, component video or
composite video.
2-1. RETAIL mode is set under Energy Options function in the on-screen
display menu.
2-2. When the external device is connected to the VGA, HDMI, component
video, composite video terminal, the NO SIGNAL menu is displayed.
The monitor keeps ON mode.
2-3. For example, In ON mode at HDMI-1 terminal, when the Monitor
receives a signal from an external HDMI-1 device, The monitor
disappear NO SIGNAL menu and displays contents.
3-1. OFFICE mode is set under Energy Options in the on-screen display
menu
3-2. When the external device is connected to the VGA terminal, the NO
SIGNAL menu is displayed and 10 seconds later the Monitor switches
to Auto Power save mode.
3-3. In Auto Power save mode at VGA terminal, when the Monitor receives
asignal from an external VGA device, it switches automatically to ON
mode.
NOTE:
Note that in Auto Power save mode at VGA terminal, the Monitor does not
switch automatically to ON mode even if a signal is input from an external
device using HDMI,component video or composite video.
If the power cord is unplugged during Auto Power save mode at VGA
terminal, the Monitor will starts in Auto Standby mode the next time it is
turned on.
3-4. When the external device is connected to another terminal (HDMI,
component video, composite video), the NO SIGNAL menu is displayed
and 10 seconds later the Monitor switches to Auto Power save mode.
English-20