GE CV936 Owner's Manual And Installation Instructions page 11

Installation instructions
TOOLS AND MATERIALS
REQUIRED INOT SUPPUEDI
Pencil and Phillips and
tape measure Flat blade screwdrivers
Ducttape
1/g' and 3/d' bits
Spirit level
1/4" pivoting hex socket
Safety glasses
Flashlight
UL ListedWire nuts
Pliers
Hammer Tin Snips
Wire Cutter/
Stripper
Saber saw or Key Hole Saw
Allen
Wrench
Ladder
Additional Materials:
• 120V6OHz.15or 20 Amp, 2 wire with ground.
Properly grounded branch circuit.
° Strain relief for junction box.
° 7" round metal duct, 3-1/4" x 10" rectangular duct
or 3-1/4" x 12" rectangular duct length to suit installation.
REMOVE THE PACKAGING
o Remo_ e the small box housing the motor.
* IJft the hood out of the box.
Wood
Mounting
Support
r-
i =
Hood
/ _
," ,iiiiiii
Motor ,' ,' Parts
,, ,, ,, Package
i //
ShippingCarton
* Remo\ e shipping screws holding the wood mounting
piece to the back side of the hood. Set aside wood
mounting piece and screws for later installation. Do not
discard.
* Remove the "V" shaped carton insert.
* Remove parts package from the "V" shaped cardboard
inse_'t.
* Remove junction box cover and knockout.
* Install strain relief onto back or top of hood.
'_ Remo', e all tape and packing material ,q'om the
hood, duct transition
and motor.
11