5_First Steps; Battery; 1_Charging The Battery - DeWalt MD501 Quick Start Manual

8
1_ Micro USB & Charging port:
Connect to external USB device or other mobile device.
2_ Earphone Jack:
The built-in speaker will automatically shut down when
the earphone jack is plugged in.
3_ Volume up key:
To control the volume
4_ Volume down key:
To control the volume
5_ Power key:
Short press to activate screen lock,
long press to power on and off
6/7_ Side key:
Optional keys used by different apps.
8_ SD Card Slot:
Compartment for Micro SD card on the back of the device.
9_ SIM Card Slots:
Compartment for Micro SIM cards on the back of the device.
10_ Wireless charging and NFC areas:
Located mid-centre area on back of the device.
11_ Back Key:
Return to previous screen.
12_ Home Key:
Return to Home screen.
13_ Menu:
Bring up a list with options.
QUICK START
KEYS

5_FIRST STEPS

5.1_BATTERY

The battery in this phone
The battery is not fully charged when the phone is purchased,
but it contains enough energy to power on the phone. To obtain
best battery performance and battery life, let the battery
discharge completely before charging it completely for the
first three charging cycles.
NOTE
Because this phone has built-in battery, if the phone has
a fault and cannot be turned off, you can long press the on/off
button for 20 seconds to reset. This will restart the phone.
Using the reset functionality may result in loss of unsaved data,
please use with caution!

5.1.1_CHARGING THE BATTERY

Connect the USB cable with the USB connector at the top
of the device.
Connect the other side of the USB cable with the socket
of the Power Supply.
After charging, remove the USB cable from the charger.
This device supports wireless chargers adhering to the
QI standard. The inductive charging area is at the back side
of the housing under the D
cannot be removed by the user.
WALT logo.
E
9
EN