Advertisement

Water Dispenser
User Manual
BSS-2201 TT

Advertisement

Table of Contents
loading

Summary of Contents for Beko BSS-2201 TT

  • Page 1 Water Dispenser User Manual BSS-2201 TT...
  • Page 2 Please read this user manual first! Dear Customer, Thank you for preferring a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
  • Page 3: Table Of Contents

    CONTENTS 1 Important instructions for safety and environment 1.1. General safety ....4 1.2 Compliance with the WEEE Regulation . . 5 1.3 Package information .
  • Page 4: Important Instructions For Safety And Environment

    Important instructions for safety and environment This section includes safety ins- Never turn on the heating switch • tructions that will help ensure the when there is no water. protection from risks of personal When carrying it, the angle of •...
  • Page 5: Compliance With The Weee Regulation

    Important instructions for safety and environment Do not damage the refrigerant 1.4 Things to be done for saving en- • ergy circuit. To avoid a hazard due to insta- 1. Do not pour hot water into the water dispenser. • bility of the appliance,it must be 2.
  • Page 6: Your Water Dispenser

    Your Water Dispenser 2.1 Overview 2.1.1 Controls and parts 7. Water receptacle 1. Top cover 8. Heating button (Red) 2. Heating indicator 9. Cooling button (Green) 3. Cooling indicator 10. Condenser 4. Body 11. Drain plug 5. Hot water tap (Red) 12.
  • Page 7: Your Water Dispenser

    Your Water Dispenser Model BSS-2201 TT Product Category Water Dispenser Hot water tank capacity (L) Cold water tank capacity (L) Heating capacity (L/H) Cooling capacity (L/H) Degree of the hot water (°C) 85-95 Degree of the cold water (°C) 5-10...
  • Page 8: Operation

    Operation 3.1 Initial use 11. Push water faucet buttons to insure water flows from both faucets. 1. Remove all the packaging and label materials 12 .Plug dispenser again into the electrical and dispose of them pursuant to the local re- outlet.
  • Page 9: Operatıon

    Operation 7. Do not locate the dispenser in the area where 8. Turn on the cooling switch, the green LED indi- the temperature may fall below freezing point cator will be on and the cooling system starts (0°C- 32°F). working. When the cold water falls down to 8.
  • Page 10: Cleaning And Maintenance

    Cleaning and maintenance 4.1 Maintenance 6. After cleaning the product, completely dry it. Fill the water to the tanks until waters comes out of 1. Remove power plug or disconnect from the the hot water faucet, then connect the electric mains before performing any maintenance or power plug.
  • Page 11: Troubleshooting

    Troubleshooting You can solve many common water dispenser problems easily, saving you the cost of a possible ser- vice call. Try the suggestions outlined below to see if you can solve them before calling the service center. Water dispenser does not operate. • Not plugged in.
  • Page 12 www.beko.com...

Table of Contents