LG 49WEC Owner's Manual page 36

36
The operation does not work normally.
Problem
The power suddenly turned off.
I see a white screen.
The screen stays transparent.
The proximity sensor operates even when
there is no person around.
Screen is dimmer than before
Fridge does not operate
Fridge Compartment Temperature too
warm
Vibration or Rattling or Abnormal Noise
Moisture forms on Cabinet Surface
Moisture collects inside
Fridge has odor
Door not closing properly
The proximity sensor does not work.
NOTE
The software-related contents may be changed without prior notice due to upgrade of the product functions.
•
Is the Timers set?
•
Check the power control settings. Power interrupted.
•
Do you have any video files waiting to be played?
•
Check if the video playback has been paused. Run the My Media app
•
and play the video again.
• Check whether the door has been closed properly.
The proximity sensor may operate when there are foreign substances
•
like dust, etc. in your installation environment.
• Change the Signage Setup > Proximity Sensitivity value from High to
Mid or Low.
When Cooler Temperature Controller is Off, Temperature is increased,
•
so screen is dimmed for protect Product.
• Check whether the door has been closed properly.
• Power plug may be unplugged from the electric outlet.
- Plug it in securely.
Temperature control not set on proper position.
•
- Refer to Temperature Control section.
Appliance is placed close to heat source.
•
• Warm weather-frequent door openings.
• Door left open for a long time.
The floor on which the fridge is installed may be uneven or the fridge
•
may be unstable.
Unnecessary objects placed in the back side of the fridge.
•
• This phenomenon is likely to occur in a wet space. Wipe it with a dry
towel.
Too frequent or too long door openings.
•
- In humid weather, air carries moisture into fridge when doors are
opened.
• Foods with strong odors should be tightly covered or wrapped.
Check for spoiled food.
•
Interior needs cleaning. Refer to CLEANING section.
•
Fridge is not level.
•
The floor on which the fridge is installed may be uneven or the fridge
•
may be unstable.
Sensor data is ignored, when object are in front of product during 1
•
minutes. But object is not during 1minutes, Sensor is starting work.
Action